DOC AIRBUS | AMM A320FInstallation of the Girt-Bar Fitting Blanking-Plates
TASK 52-13-31-400-007-A
Installation of the Girt-Bar Fitting Blanking-Plates
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 52-13-31-869-053-A
Subtask 52-13-31-420-065-A
Subtask 52-13-31-410-065-A Subtask 52-13-31-410-066-A
[Rev.10 from 2021]
2026.04.02 06:27:32 UTC
Installation of the Girt-Bar Fitting Blanking-Plates
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.06AAC1) | Polysulfide Sealant-General Purpose Interfay - |
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 261 | AFT CABIN UTILITY AREA |
| 262 | AFT CABIN UTILITY AREA |
| 832, 842 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-10-00-010-001-A | Opening of the Passenger/Crew Door |
| TASK 52-10-00-410-001-A | Closing of the Passenger/Crew Door |
| TASK 52-13-31-400-003-A | Installation of the Girt Bar Fittings |
Girt-Bar Fitting Blanking-Plates and Sealing of the Blanking PlatesSubtask 52-13-31-869-053-A
A. Aircraft Maintenance Configuration
(1) Make sure that the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE is in position at passenger/crew door 832( 842).
(2) Make sure that passenger/crew door 832( 842) is open (Ref. AMM TASK 52-10-00-010-001).
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.
4. Procedure(1) Make sure that the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE is in position at passenger/crew door 832( 842).
(2) Make sure that passenger/crew door 832( 842) is open (Ref. AMM TASK 52-10-00-010-001).
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.
Subtask 52-13-31-420-065-A
A. Installation of the Girt-Bar Fitting Blanking-Plates
(1) If necessary, clean all the surfaces between the components with the Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) .
(2) Install the spacers (4).
(3) Put the blanking plates (3) in position on the structure (1).
(4) Install the screws (2).
(5) Tighten the screws (2).
(6) Apply a bead of Polysulfide Sealant-General Purpose Interfay - (Material No.06AAC1) between the blanking plates (3) and the structure (1).
5. Close-up(1) If necessary, clean all the surfaces between the components with the Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) .
(2) Install the spacers (4).
(3) Put the blanking plates (3) in position on the structure (1).
(4) Install the screws (2).
(5) Tighten the screws (2).
(6) Apply a bead of Polysulfide Sealant-General Purpose Interfay - (Material No.06AAC1) between the blanking plates (3) and the structure (1).
Subtask 52-13-31-410-065-A Subtask 52-13-31-410-066-A
B. Close Access
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Make sure that the work area is clean and clear of tools and other items.
(3) Close passenger/crew door 832( 842) (Ref. AMM TASK 52-10-00-410-001).
(4) Remove the access platform(s).
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Make sure that the work area is clean and clear of tools and other items.
(3) Close passenger/crew door 832( 842) (Ref. AMM TASK 52-10-00-410-001).
(4) Remove the access platform(s).