Removal of the Girt Bar Fittings

TASK 52-13-31-000-003-A
Removal of the Girt Bar Fittings

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
No specific	AR	SCRAPER - NON METALLIC

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
832, 842

D. Referenced Information

REFERENCE	DESIGNATION
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
Girt Bar Fittings

3. Job Set-up
Subtask 52-13-31-010-057-A

A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in front of the passenger/crew door 832(842).
(2) Open the passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-010-001).

4. Procedure
Subtask 52-13-31-020-053-A

A. Removal of the Girt Bar Fittings
(1) Remove the old sealant around the girt bar fittings and on the heads of the screws (111) and (121) with Non Aqueous Cleaner-General - - (Material No.08BAA9) , Textile-Lint free Cotton - (Material No.14SBA1) and a SCRAPER - NON METALLIC.
(2) Loosen the screws (111) (121) and remove them.
(3) Remove the girt bar fittings (110) (120).

[Rev.10 from 2021] 2026.04.02 06:27:32 UTC