W DOC AIRBUS | AMM A320F

Servicing of the AFT Passenger/Crew Doors

TASK 52-13-00-610-001-A
Servicing of the AFT Passenger/Crew Doors

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 4M (13 FT)
No specific
1
BRUSH - NYLON
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
98D52103501000
1
BALLAST WEIGHT - PASSENGER CREW DOOR
 B. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.12ABB1)
Corrosion Preventive Compound-Water Displacing Hard Film -
(Material No.12ABC1)
Corrosion Preventive Compound_Water Displacing Soft Film -
(Material No.12ACB1)
Corrosion Preventive Compound-Heavy Duty Hard Film -
(Material No.12ACC1)
Corrosion Preventive Compound-Heavy Duty Soft Film -
 C. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
832, 832AZ, 842, 842AZ
 D. Referenced Information
REFERENCE
DESIGNATION
TASK 25-23-46-000-002-A
Removal of the Door Linings from the Aft Passenger/Crew Doors
TASK 25-23-46-400-002-A
Installation of the Door Linings on the Aft Passenger/Crew Doors
TASK 25-62-44-000-002-A
Removal of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-000-012-A
Removal of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-000-802-A
Removal of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-000-804-A
Removal of the Right-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-006-A
Installation of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-400-007-A
Installation of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-802-A
Installation of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-400-803-A
Installation of the Right-Hand Escape-Slide-Raft Pack-Assembly
TASK 51-78-00-916-001-A
Application of Temporary Protection System (TPS)
TASK 52-10-00-010-001-A
Opening of the Passenger/Crew Door
TASK 52-10-00-080-001-A
Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide
TASK 52-10-00-080-001-B
Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft
TASK 52-10-00-410-001-A
Closing of the Passenger/Crew Door
TASK 52-10-00-480-001-A
Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide
TASK 52-10-00-480-001-B
Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft
TASK 52-10-00-860-001-A
Special Precautions before Work on the Passenger/Crew Door
TASK 52-10-00-860-002-A
Special Precautions after Work on the Passenger/Crew Door
TASK 56-21-13-100-002-A
Cleaning the Outer Surface of the Outer Window Panes
3. Job Set-up
WARNING: DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE THAN 65 KNOTS.
WARNING: BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
  • THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
  • THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
IF YOU DO NOT OBEY THESE INSTRUCTIONS, THE DOOR CAN OPEN WITH FORCE OR THE ESCAPE SLIDE CAN DEPLOY SUDDENLY. THIS CAN CAUSE INJURY AND/OR DAMAGE.
WARNING: STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES. IF THE RED WARNING LIGHT FLASHES, REMAINING PRESSURE CAN CAUSE THE DOOR TO OPEN SUDDENLY AND CAN:
  • KILL OR CAUSE SERIOUS INJURY TO PERSONS
  • CAUSE DAMAGE TO THE AIRCRAFT.
Subtask 52-13-00-010-059-A
A. Get Access
   (1) Put an ACCESS PLATFORM 4M (13 FT) in position at the aft passenger/crew door:
     (a) For the left passenger/crew door at the zone 832.
     (b) For the right passenger/crew door at the zone 842.
   (2) Open the aft passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-010-001).
   (3) Obey the special precautions before you start work on the door (Ref. AMM TASK 52-10-00-860-001).
Subtask 52-13-00-865-052-A
B. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
121VUEIS/SLIDES/ARM AND WARN/FLT15WNP11
121VUEIS/SLIDES/ARM AND WARN/GND13WNP10
121VUEIS/SDAC1 AND 2/DOOR/DET/PAX48WVP05
Subtask 52-13-00-010-060-A ** ON A/C NOT FOR ALL
C. Removal of the Escape-Slide Pack-Assembly
   (1) Remove the door lining panels:
(Ref. AMM TASK 25-23-46-000-002)
     (a) For the left door: 832AZ.
     (b) For the right door: 842AZ.
   (2) Remove the escape slide:
     (a) For the left door:
If installed, remove the left-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-000-002).
     (b) For the right door:
If installed, remove the right-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-000-802).
   (3) Install the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR, (Ref. AMM TASK 52-10-00-480-001).
   (4) Remove the door insulation.
Subtask 52-13-00-010-060-B ** ON A/C NOT FOR ALL
C. Removal of the Escape-Slide Raft Pack-Assembly
   (1) Remove the door lining panels:
(Ref. AMM TASK 25-23-46-000-002)
     (a) For the left door: 832AZ.
     (b) For the right door: 842AZ.
   (2) Remove the escape slide:
     (a) For the left door:
If installed, remove the left-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-000-012).
     (b) For the right door:
If installed, remove the right-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-000-804).
   (3) Install the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR, (Ref. AMM TASK 52-10-00-480-001).
   (4) Remove the door insulation.
4. Procedure
Subtask 52-13-00-110-050-A
A. Cleaning
   (1) Clean the ends of the girt bar with a BRUSH - NYLON and Non Aqueous Cleaner-General - - (Material No.08BAA9) .
   (2) Clean the window of the door (Ref. AMM TASK 56-21-13-100-002).
Subtask 52-13-00-916-050-A
B. Application of Temporary Protection
CAUTION: DO NOT APPLY TEMPORARY PROTECTION SYSTEM (TPS) TYPE 3 ON THE MOVABLE COMPONENTS. USE ONLY TPS TYPE 1 GRADE 2. IF YOU DO NOT OBEY THIS INSTRUCTION, THE MECHANISMS WILL NOT OPERATE CORRECTLY.
   (1) Apply a layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) on all the parts, but not on the mechanisms (Ref. AMM TASK 51-78-00-916-001).
   (2) Apply a layer of Corrosion Preventive Compound-Heavy Duty Soft Film - (Material No.12ACC1) or Corrosion Preventive Compound-Heavy Duty Hard Film - (Material No.12ACB1) to the inspection area (Ref. AMM TASK 51-78-00-916-001).
5. Close-up
Subtask 52-13-00-410-060-A ** ON A/C NOT FOR ALL
A. Installation of the Components
   (1) Install the door insulation.
   (2) Remove the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR (Ref. AMM TASK 52-10-00-080-001).
   (3) Install the escape slide:
     (a) For the left door:
Install the left-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-400-006).
     (b) For the right door:
Install the right-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-400-802).
   (4) Install the door lining panels:
(Ref. AMM TASK 25-23-46-400-002)
     (a) For the left door: 832AZ.
     (b) For the right door: 842AZ.
Subtask 52-13-00-410-060-B ** ON A/C NOT FOR ALL
A. Installation of the Components
   (1) Install the door insulation.
   (2) Remove the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR (Ref. AMM TASK 52-10-00-080-001).
   (3) Install the escape slide:
     (a) For the left door:
Install the left-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-400-007).
     (b) For the right door:
Install the right-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-400-803).
   (4) Install the door lining panels:
(Ref. AMM TASK 25-23-46-400-002)
     (a) For the left door: 832AZ.
     (b) For the right door: 842AZ.
Subtask 52-13-00-865-053-A
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
121VUEIS/SLIDES/ARM AND WARN/FLT15WNP11
121VUEIS/SLIDES/ARM AND WARN/GND13WNP10
121VUEIS/SDAC1 AND 2/DOOR/DET/PAX48WVP05
Subtask 52-13-00-410-061-A
C. Close Access
   (1) Obey the special precautions after the work on the door (Ref. AMM TASK 52-10-00-860-002).
   (2) Close the aft passenger/crew door 832 ( 842) (Ref. AMM TASK 52-10-00-410-001).
   (3) Make sure that the work area is clean and clear of tools and other items.
   (4) Remove the access platform(s).
[Rev.10 from 2021] 2026.04.02 06:27:26 UTC
"WTRUIB" 2025