Removal of the Girt-Bar Fitting Blanking-Plates and Drain Pans

TASK 52-11-31-000-005-A
Removal of the Girt-Bar Fitting Blanking-Plates and Drain Pans

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
No specific	AR	PLUG - BLANKING
No specific	1	SCRAPER - NON METALLIC

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
831, 841

D. Referenced Information

REFERENCE	DESIGNATION
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-11-31-000-003-A	Removal of the Girt Bar Fittings
Sealing of the Blanking Plates
Girt-Bar Fitting Blanking-Plates ** ON A/C NOT FOR ALL
Blanking Plates ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-11-31-010-060-A

A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at passenger/crew door 831(841).
(2) Open passenger/crew door 831( 841) (Ref. AMM TASK 52-10-00-010-001).

Subtask 52-11-31-010-061-A

B. Remove the girt bar fittings (Ref. AMM TASK 52-11-31-000-003).

4. Procedure
Subtask 52-11-31-020-061-A

A. Removal of the Blanking Plates
(1) Pull the cords (11) up to remove the sealant from the floor panel joints.
(2) Remove the remaining sealant around the blanking plates (1) with Non Aqueous Cleaner-General - - (Material No.08BAA9) , the Textile-Lint free Cotton - (Material No.14SBA1) and the SCRAPER - NON METALLIC.
(3) Loosen the screws (2) and remove them.
(4) Remove the blanking plates (1).

Subtask 52-11-31-020-062-A ** ON A/C NOT FOR ALL

B. Removal of the Drain Pans
(1) Remove the shims (3).
(2) Remove the nuts (9), the screws (8) and the fittings (5).
(3) Remove the clip nuts (4) from the fittings (5).
(4) Remove the nut plates (6) and the drain pans (7).
(5) Put the PLUG - BLANKING in the drain tubes.

Subtask 52-11-31-020-062-B ** ON A/C NOT FOR ALL

B. Removal of the Drain Pans
(1) Remove the shims (3).
(2) Remove the nuts (10), the bolts (9) and the fittings (5).
(3) Remove the clip nuts (4) from the fittings (5).
(4) Remove the nut plates (6), the drain pans (7) and the gasket antenna (8).
(5) Put the PLUG - BLANKING in the drain tubes.

[Rev.10 from 2021] 2026.04.02 07:24:37 UTC