W DOC AIRBUS | AMM A320F

Removal of the Door Seal

TASK 52-11-18-000-001-A
Removal of the Door Seal

ZONE: 831
ZONE: 841
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE
No specific
1
BRUSH - BRISTLED, STIFF
No specific
1
SCRAPER - NON METALLIC
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
831
FORWARD PASSENGER/CREW DOOR
841
FORWARD PASSENGER/CREW DOOR
831, 841
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 52-10-00-010-001-A
Opening of the Passenger/Crew Door
TASK 52-10-00-860-001-A
Special Precautions before Work on the Passenger/Crew Door
F Seal of the Forward Passenger/Crew Door
3. Job Set-up
Subtask 52-11-18-010-055-A
A. Get Access
WARNING: DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE THAN 65 KNOTS.
WARNING: BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
  • THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
  • THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
IF YOU DO NOT OBEY THESE INSTRUCTIONS, THE DOOR CAN OPEN WITH FORCE OR THE ESCAPE SLIDE CAN DEPLOY SUDDENLY. THIS CAN CAUSE INJURY AND/OR DAMAGE.
WARNING: STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES. IF THE RED WARNING LIGHT FLASHES, REMAINING PRESSURE CAN CAUSE THE DOOR TO OPEN SUDDENLY AND CAN:
  • KILL OR CAUSE SERIOUS INJURY TO PERSONS
  • CAUSE DAMAGE TO THE AIRCRAFT.
   (1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zone 831(841).
   (2) Open forward passenger/crew door 831( 841) (Ref. AMM TASK 52-10-00-010-001).
   (3) Obey the special precautions before you start the work on the door (Ref. AMM TASK 52-10-00-860-001).
4. Procedure
Subtask 52-11-18-020-052-A
A. Removal of the Door Seal
F Seal of the Forward Passenger/Crew Door
   (1) Remove the nuts (2) from the retainer (9), then the retainer (9) and the screws (3).
   (2) Remove the nuts (2) from the retainer (10), then the retainer (10) and the screws (3).
   (3) Remove the nuts (2) from the retainer (11), then the retainer (11) and the screws (3).
   (4) Remove the nuts (2) from the retainer (12), then the retainer (12) and the screws (3).
   (5) Remove the nuts (2) from the retainer (13), then the retainer (13) and the screws (3).
   (6) Remove the nuts (2) from the retainer (14), then the retainer (14) and the screws (3).
   (7) Remove the nuts (2) from the retainer (8), then the retainer (8) and the screws (3).
   (8) Remove the nuts (2) from the retainer (7), then the retainer (7) and the screws (3).
   (9) Remove the nuts (2) from the retainer (15), then the retainer (15) and the screws (3).
   (10) Remove the nuts (2) from the retainer (16), then the retainer (16) and the screws (3).
   (11) Remove the nuts (2) from the retainer (6), then the retainer (6) and the screws (3).
   (12) Remove the nuts (2) from the retainer (5), then the retainer (5) and the screws (3).
   (13) Remove the nuts (2) from the retainer (17), then the retainer (17) and the screws (3).
   (14) Remove the nuts (2) from the retainer (4), then the retainer (4) and the screws (3).
   (15) Remove the nuts (2) from the retainer (1), then the retainer (1) and the screws (3) and (18).
   (16) Remove the nuts (2) from the retainer (21), then the retainer (21) and the screws (18).
   (17) Remove the nuts (2) from the retainer (20), then the retainer (20) and the screws (18).
   (18) Remove the nuts (2) from the retainer (19), then the retainer (19) and the screws (18).
   (19) Remove the seal (22) from the forward passenger/crew door.
   (20) If damaged, remove the remaining sealant with the SCRAPER - NON METALLIC and the BRUSH - BRISTLED, STIFF.
[Rev.10 from 2021] 2026.04.02 07:22:04 UTC
"WTRUIB" 2025