General Visual Inspection of Door Stop Assemblies on Forward Passenger/Crew Door, LH/RH

TASK 52-11-00-210-001-A
General Visual Inspection of Door Stop Assemblies on Forward Passenger/Crew Door, LH/RH

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 831
ZONE: 841

1. Reason for the Job

NOTE: The effectivity of this task is "ALL". To know if this task is applicable for your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
831	FORWARD PASSENGER/CREW DOOR
841	FORWARD PASSENGER/CREW DOOR

D. Referenced Information

REFERENCE	DESIGNATION
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
TASK 52-10-00-860-001-A	Special Precautions before Work on the Passenger/Crew Door
TASK 52-10-00-860-002-A	Special Precautions after Work on the Passenger/Crew Door
SRM 51110001	(for corrective action)
SRM 51220001	(for corrective action)
Forward Passenger/Crew Doors - Door Stop Assemblies

3. Job Set-up
Subtask 52-11-00-010-062-A

A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position :
(a) For the left passenger/crew door at the zone 831.
(b) For the right passenger/crew door at the zone 841.
(2) Open the forward passenger/crew door 831 (841), (Ref. AMM TASK 52-10-00-010-001).
(3) Obey the special precautions before you start the work on the door. (Ref. AMM TASK 52-10-00-860-001)

Subtask 52-11-00-110-053-A

B. Cleaning of the Structure
(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and with a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.

4. Procedure
Subtask 52-11-00-210-054-A

A. Inspection

Forward Passenger/Crew Doors - Door Stop Assemblies

(1) Do a visual inspection of the door stop assemblies of the forward left and right passenger/crew doors.
(2) Make sure that there are no cracks or signs of corrosion on the stop fittings and the stop screws.
- If you find corrosion damage,refer to the Stuctural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.

5. Close-up
Subtask 52-11-00-410-061-A

A. Close Access
(1) Obey the special precautions after the work on the door. (Ref. AMM TASK 52-10-00-860-002)
(2) Close the forward passenger/crew door 831 (841), (Ref. AMM TASK 52-10-00-410-001).
(3) Make sure that the work area is clean and clear of tool(s) and other items.
(4) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.02 06:27:20 UTC