Functional Check of Door Stops Adjustment

TASK 52-10-00-200-001-A
Functional Check of Door Stops Adjustment

WARNING: DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE THAN 65 KNOTS.

WARNING: BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:

THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.

IF YOU DO NOT OBEY THESE INSTRUCTIONS, THE DOOR CAN OPEN WITH FORCE OR THE ESCAPE SLIDE CAN DEPLOY SUDDENLY. THIS CAN CAUSE INJURY AND/OR DAMAGE.

WARNING: STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES. IF THE RED WARNING LIGHT FLASHES, REMAINING PRESSURE CAN CAUSE THE DOOR TO OPEN SUDDENLY AND CAN:

KILL OR CAUSE SERIOUS INJURY TO PERSONS
CAUSE DAMAGE TO THE AIRCRAFT.

ZONE: 831
ZONE: 832
ZONE: 841
ZONE: 842

1. Reason for the Job
Refer to the MPD TASK: 521000-07
FUNCTIONAL CHECK OF DOOR STOPS ADJUSTMENT
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE
No specific	1	FLASHLIGHT
No specific	1	GAGE - FEELER
No specific	1	MIRROR - INSPECTION

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
831	FORWARD PASSENGER/CREW DOOR
832	AFT PASSENGER/CREW DOOR
841	FORWARD PASSENGER/CREW DOOR
842	AFT PASSENGER/CREW DOOR
831, 832, 841, 842

C. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-45-000-002-A	Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door
TASK 25-23-45-000-003-A	Removal of the Door Frame Linings from the Left Aft Passenger/Crew Door
TASK 25-23-45-000-004-A	Removal of the Door Frame Linings from the Right Aft Passenger/Crew Door
TASK 25-23-45-000-005-A	Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door
TASK 25-23-45-400-005-A	Installation of the Door Frame Linings on the Right Aft Passenger/Crew Door
TASK 25-23-45-400-006-A	Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door
TASK 25-23-45-400-007-A	Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door
TASK 25-23-45-400-008-A	Installation of the Door Frame Linings on the Left Aft Passenger/Crew Door
TASK 25-62-44-400-006-A	Installation of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-400-007-A	Installation of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-802-A	Installation of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-400-803-A	Installation of the Right-Hand Escape-Slide-Raft Pack-Assembly
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
TASK 52-10-00-480-001-A	Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide
TASK 52-10-00-480-001-B	Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft
TASK 52-10-00-860-001-A	Special Precautions before Work on the Passenger/Crew Door
TASK 52-10-00-860-002-A	Special Precautions after Work on the Passenger/Crew Door
TASK 52-11-00-820-001-A	Adjustment of the Forward Passenger/Crew Door
TASK 52-13-00-820-001-A	Adjustment of the Aft Passenger/Crew Door
Door Stop Adjustment

3. Job Set-up
Subtask 52-10-00-010-062-A

A. Get Access
(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zone 831(841) or 832(842).
(2) Open passenger/crew door 831( 841) or 832( 842) (Ref. AMM TASK 52-10-00-010-001).
(3) Obey the special precautions before you do the work on the door (Ref. AMM TASK 52-10-00-860-001).
(4) Make sure that the escape slide, the escape raft or the ballast weight is installed:
(a) For the left door (Ref. AMM TASK 25-62-44-400-006) or (Ref. AMM TASK 25-62-44-400-007) or (Ref. AMM TASK 52-10-00-480-001)
(b) For the right door (Ref. AMM TASK 25-62-44-400-802) or (Ref. AMM TASK 25-62-44-400-803) or (Ref. AMM TASK 52-10-00-480-001).

Subtask 52-10-00-010-100-A

B. Removal of the Components
(1) Remove the necessary door frame linings:

For the left forward passenger/crew door (Ref. AMM TASK 25-23-45-000-005)
For the right forward passenger/crew door (Ref. AMM TASK 25-23-45-000-002)
For the left aft passenger/crew door (Ref. AMM TASK 25-23-45-000-003)
For the right aft passenger/crew door (Ref. AMM TASK 25-23-45-000-004).

Subtask 52-10-00-410-064-A

C. Closing of the Door
(1) Close the passenger/crew door from the inner side (Ref. AMM TASK 52-10-00-410-001).

4. Procedure
Subtask 52-10-00-220-057-A

A. Functional Check of Door Stops Adjustment
(1) If necessary, do this check with the FLASHLIGHT and the MIRROR - INSPECTION.
(2) Measure the clearance between the stop screw (2) and the door frame fitting (1) with the GAGE - FEELER.
(3) Make sure that clearance A between the stop screw (2) and the door frame fitting (1) is 0 MM (0 IN.) +0.5 MM (0.0197 IN.).
(4) Make sure that a minimum of three stop screws (2) touches the door frame with:

Two stop screws (2) on one side of the frame, and
One stop screw (2) on the opposite side of the frame.

(5) If necessary, adjust the door stops (Ref. AMM TASK 52-11-00-820-001) or (Ref. AMM TASK 52-13-00-820-001).

5. Close-up
Subtask 52-10-00-010-101-A

A. Opening of the Door
(1) Open the passenger/crew door from the inner side (Ref. AMM TASK 52-10-00-010-001).

Subtask 52-10-00-410-110-A

B. Installation of the Components
(1) Install the necessary door frame linings:

For the left forward passenger/crew door (Ref. AMM TASK 25-23-45-400-006)
For the right forward passenger/crew door (Ref. AMM TASK 25-23-45-400-007)
For the left aft passenger/crew door (Ref. AMM TASK 25-23-45-400-008)
For the right aft passenger/crew door (Ref. AMM TASK 25-23-45-400-005).

Subtask 52-10-00-410-065-A

C. Close Access
(1) Obey the special precautions after the work on the door (Ref. AMM TASK 52-10-00-860-002).
(2) Make sure that the work area is clean and clear of tools and other items.
(3) Close passenger/crew door 831( 841) or 832( 842) (Ref. AMM TASK 52-10-00-410-001).
(4) Remove all the fixtures, tools, test and support equipment used during this procedure.
(5) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.02 06:27:18 UTC