Reactivation of the APU after Removal of APU Substitution Kit (APS 3200)

TASK 49-10-00-440-006-A-01
Reactivation of the APU after Removal of APU Substitution Kit (APS 3200)

FIN: 4005KM ** ON A/C NOT FOR ALL

1. Reason for the Job
MMEL 49-10-01C
POWER PLANT (APU)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	WARNING NOTICE(S)

B. Referenced Information

REFERENCE	DESIGNATION
TASK 49-11-00-000-003-A	Removal of the APU Substitution Kit (APS 3200)
TASK 49-11-11-400-003-A	Installation of the Power Plant (APU) (APS 3200)

3. Job Set-up
Subtask 49-10-00-860-082-A ** ON A/C NOT FOR ALL

A. Not applicable

4. Procedure
Subtask 49-10-00-440-058-A ** ON A/C NOT FOR ALL

A. Reactivation of the APU
(1) Remove the APU Substitution Kit (Ref. AMM TASK 49-11-00-000-003).
(2) Install a new APU (Ref. AMM TASK 49-11-11-400-003).
(3) Remove the WARNING NOTICE(S) 'APU INOP'.

5. Close-up
Subtask 49-10-00-860-083-A ** ON A/C NOT FOR ALL

A. Make an entry in the technical logbook that the APU is re-activated.

[Rev.10 from 2021] 2026.04.01 01:26:30 UTC