DOC AIRBUS | AMM A320FDownload Engineering Data to the USB flash drive with the Multi-Purpose Flight-Attendant Panel (MP-FAP)
TASK 46-41-00-720-819-A
Download Engineering Data to the USB flash drive with the Multi-Purpose Flight-Attendant Panel (MP-FAP)
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 46-41-00-861-142-A ** ON A/C NOT FOR ALL
Subtask 46-41-00-720-069-A ** ON A/C NOT FOR ALL
Subtask 46-41-00-862-141-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:26:13 UTC
Download Engineering Data to the USB flash drive with the Multi-Purpose Flight-Attendant Panel (MP-FAP)
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | USB FLASH DRIVE, MIN. 2GB CAPACITY |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 46-41-00-610-811-A | Get access to the ALNA Graphical User Interface (GUI) - Maintenance Access - with Multi-Purpose Flight-Attendant Panel (MP-FAP) |
Subtask 46-41-00-861-142-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Access the ALNA Graphical User Interface (GUI) - Maintenance Access - via Multi-Purpose Flight-Attendant Panel (MP-FAP) (Ref. AMM TASK 46-41-00-610-811).
Subtask 46-41-00-865-170-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Access the ALNA Graphical User Interface (GUI) - Maintenance Access - via Multi-Purpose Flight-Attendant Panel (MP-FAP) (Ref. AMM TASK 46-41-00-610-811).
B. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | WAP | 27MH | D07 |
| 2000VU | CINS-HESU | 21RF | E02 |
Subtask 46-41-00-720-069-A ** ON A/C NOT FOR ALL
A. Download the Engineering Data to the USB flash drive with the Multi-Purpose Flight-Attendant Panel (MP-FAP)
5. Close-upNOTE: It is recommended to use a high speed USB flash drive 2.0 with a minimum capacity of 2GB.
| ACTION | RESULT |
|---|---|
| In the cabin, at the MP-FAP: | In the cabin, on the MP-FAP display: |
| 1.Touch the "MISCELLANEOUS" icon. |
|
| 2.Put the USB FLASH DRIVE, MIN. 2GB CAPACITY into the USB port of the MP-FAP and wait one minute. | |
| 3.Touch the "EXPORT" icon. |
|
| 4.Touch the "OK" icon and wait until the export is completed. |
|
| 5.Remove the USB flash drive. | |
Subtask 46-41-00-862-141-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Touch the "LOGOFF" icon.
(Ref. AMM TASK 24-41-00-862-002).
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Touch the "LOGOFF" icon.
NOTE: It is not necessary to log off, if you continue with a different test procedure.
(3) De-energize the aircraft electrical circuits(Ref. AMM TASK 24-41-00-862-002).