Ground Connection Test Internet
TASK 46-41-00-720-807-A
Ground Connection Test Internet
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 46-41-00-861-098-C ** ON A/C NOT FOR ALL
Subtask 46-41-00-720-057-C ** ON A/C NOT FOR ALL
Subtask 46-41-00-862-098-B ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:26:14 UTC
Ground Connection Test Internet
ZONE: 200
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | LAPTOP - FOR GSM ALNA MAINTENANCE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 31-21-00-750-002-A | Procedure to Set the Clock |
| TASK 34-10-00-860-004-A | Inertial Reference (IR) Alignment-Procedure |
| TASK 34-10-00-860-004-A-01 | Automatic Inertial Reference (IR) Alignment-Procedure |
| TASK 34-10-00-860-004-A-02 | Inertial Reference (IR) Alignment-Procedure to do a Check of the Links between each Flight Management and Guidance Computer (FMGC) and the three Air Data/Inertial Reference Units (ADIRUs) |
| TASK 46-41-00-610-811-A | Get access to the ALNA Graphical User Interface (GUI) - Maintenance Access - with Multi-Purpose Flight-Attendant Panel (MP-FAP) |
| TASK 46-41-00-710-804-A | System Monitoring Condition Check |
Subtask 46-41-00-861-098-C ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Access the ALNA Graphical User Interface - Maintenance Access - via Multi-Purpose Flight-Attendant Panel (MP-FAP) (Ref. AMM TASK 46-41-00-610-811).
(3) Make sure that:
Subtask 46-41-00-865-105-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Access the ALNA Graphical User Interface - Maintenance Access - via Multi-Purpose Flight-Attendant Panel (MP-FAP) (Ref. AMM TASK 46-41-00-610-811).
(3) Make sure that:
- The Air Data/Inertial Reference-Units (ADIRUs) are ON and aligned (Ref. AMM TASK 34-10-00-860-004).
- The "Time and Date" are set (Ref. AMM TASK 31-21-00-750-002).
- The "City Pair" is set.
- The "Flight Number" is set.
- The A/C is outside the hangar, with line-of-sight to the satellite.
- The ALNA system operates correctly (Ref. AMM TASK 46-41-00-710-804).
B. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | WAP | 27MH | D07 |
| 2000VU | CINS-HESU | 21RF | E02 |
Subtask 46-41-00-720-057-C ** ON A/C NOT FOR ALL
A. Ground Connection Test Internet
5. Close-upNOTE: You can do this procedure at the Multi-Purpose Flight-Attendant Panel (MP-FAP) or on the LAPTOP - FOR GSM ALNA MAINTENANCE. The procedures at the MP-FAP and on the maintenance laptop are the same.
NOTE: The table that follows gives the procedure for the MP-FAP.
| ACTION | RESULT |
|---|---|
| In the cabin, at the MP-FAP: | In the cabin, on the MP-FAP display: |
| 1.Touch the "SYSTEM TEST" icon. |
|
| 2.Select the "CALIBRATION AND FUNCTION TEST" tab. |
|
| 3.Touch the "GROUND CONNECTION TEST" icon. |
|
| 4.Touch the "START TEST" icon. |
|
| 5.Touch the "ARROW DOWN" icon. |
|
| 6.Touch the "INTERNET" icon. |
|
| 7.Touch the "START" icon. |
|
| 8.Touch the "SHOW RESULTS" icon. |
|
| 9.Use the "ARROW" icons to scroll in the result list. |
|
| 10.Touch the "NEXT" icon. |
|
| 11.Touch the "CLOSE" icon |
|
Subtask 46-41-00-862-098-B ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Touch the "LOGOFF" icon.
(Ref. AMM TASK 24-41-00-862-002).
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Touch the "LOGOFF" icon.
NOTE: It is not necessary to log off, if you continue with a different test procedure.
(3) De-energize the aircraft electrical circuits(Ref. AMM TASK 24-41-00-862-002).