Reset of the SATCOM Global Xpress Aviation (GXA) from JetWave Graphical User Interface (GUI)

TASK 46-41-00-600-809-A
Reset of the SATCOM Global Xpress Aviation (GXA) from JetWave Graphical User Interface (GUI)

ZONE: 200

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)

3. Job Set-up
Subtask 46-41-00-861-146-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

4. Procedure
Subtask 46-41-00-600-054-A ** ON A/C NOT FOR ALL

A. Reset of the System through Web GUI
(1) Get access to the JetWave Graphical User Interface (GUI) (Ref. AMM D/O 44-33-00-61).
(2) Navigate to the "AES reset" page and then push the "Reset" button.

5. Close-up
Subtask 46-41-00-862-145-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) Log off from the JetWave GUI.
(2) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(3) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.02 06:26:11 UTC