Connection of the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) to the Flight Operations and MAintenance eXchanger (FOMAX)
TASK 46-26-32-860-801-A
Connection of the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) to the Flight Operations and MAintenance eXchanger (FOMAX)
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 46-26-32-861-058-A ** ON A/C NOT FOR ALL
Subtask 46-26-32-860-061-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 07:20:09 UTC
Connection of the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) to the Flight Operations and MAintenance eXchanger (FOMAX)
ZONE: 128
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| 072-3175-001 | 1 | FOMAX LMF |
| 072-3175-003 | 1 | FOMAX LMF |
| 072-3175-004 | 1 | FOMAX LMF |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 128 | REAR AVIONIC COMPARTMENT |
| 824 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
Subtask 46-26-32-861-058-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 46-26-32-865-080-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
B. Make sure that this(these) circuit breaker(s) is(are) closed:
Subtask 46-26-32-010-054-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | FOMAX | 67TA | J01 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | FOMAX | 67TA | R12 |
C. Get access to the avionics compartment.
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at access door 824 in zone 128.
(2) Open access door 824.
4. Procedure(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at access door 824 in zone 128.
(2) Open access door 824.
Subtask 46-26-32-860-061-A ** ON A/C NOT FOR ALL
A. Connection of the Maintenance Electronic Device (with the LMF) to the FOMAX
(1) On shelf 81VU, on electronics rack 80VU, get access to the FOMAX.
(2) On electronics rack 80VU, connect the maintenance electronic device to the FOMAX maintenance plug (1) (74TA).
(3) Start the maintenance electronic device and wait for two minutes for the full startup and connection.
(4) On the maintenance electronic device, start the 072-3175-001 FOMAX LMF or the 072-3175-003 FOMAX LMF or the 072-3175-004 FOMAX LMF.
Subtask 46-26-32-860-061-B ** ON A/C NOT FOR ALL (1) On shelf 81VU, on electronics rack 80VU, get access to the FOMAX.
(2) On electronics rack 80VU, connect the maintenance electronic device to the FOMAX maintenance plug (1) (74TA).
(3) Start the maintenance electronic device and wait for two minutes for the full startup and connection.
(4) On the maintenance electronic device, start the 072-3175-001 FOMAX LMF or the 072-3175-003 FOMAX LMF or the 072-3175-004 FOMAX LMF.
A. Connection of the Maintenance Electronic Device (with the LMF) to the FOMAX
(1) On shelf 81VU, on electronics rack 80VU, get access to the FOMAX.
(2) On electronics rack 80VU, connect the maintenance electronic device to the FOMAX maintenance plug (1) (74TA).
(3) Start the maintenance electronic device and wait for two minutes for the full startup and connection.
(4) On the maintenance electronic device, start the 072-3175-003 FOMAX LMF or the 072-3175-004 FOMAX LMF.
Subtask 46-26-32-860-061-CS ** ON A/C NOT FOR ALL (1) On shelf 81VU, on electronics rack 80VU, get access to the FOMAX.
(2) On electronics rack 80VU, connect the maintenance electronic device to the FOMAX maintenance plug (1) (74TA).
(3) Start the maintenance electronic device and wait for two minutes for the full startup and connection.
(4) On the maintenance electronic device, start the 072-3175-003 FOMAX LMF or the 072-3175-004 FOMAX LMF.
A. Connection of the Maintenance Electronic Device (with the LMF) to the FOMAX
(1) On shelf 81VU, on electronics rack 80VU, get access to the FOMAX.
(2) On electronics rack 80VU, connect the maintenance electronic device to the FOMAX maintenance plug (1) (74TA).
(3) Start the maintenance electronic device and wait for two minutes for the full startup and connection.
(4) On the maintenance electronic device, start the 072-3175-004 FOMAX LMF.
(1) On shelf 81VU, on electronics rack 80VU, get access to the FOMAX.
(2) On electronics rack 80VU, connect the maintenance electronic device to the FOMAX maintenance plug (1) (74TA).
(3) Start the maintenance electronic device and wait for two minutes for the full startup and connection.
(4) On the maintenance electronic device, start the 072-3175-004 FOMAX LMF.
FOMAX Maintenance Plug 74TA on Electronics Rack 80VU