Removal of the Flight Operations and MAintenance eXchanger (FOMAX) Wi-Fi Antenna
TASK 46-26-17-000-801-A
Removal of the Flight Operations and MAintenance eXchanger (FOMAX) Wi-Fi Antenna
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 46-26-17-861-050-A ** ON A/C NOT FOR ALL Subtask 46-26-17-865-050-A ** ON A/C NOT FOR ALL
Subtask 46-26-17-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:26:07 UTC
Removal of the Flight Operations and MAintenance eXchanger (FOMAX) Wi-Fi Antenna
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-13-41-000-002-A | Removal of the Sidewall Panels |
Subtask 46-26-17-861-050-A ** ON A/C NOT FOR ALL Subtask 46-26-17-865-050-A ** ON A/C NOT FOR ALL
B. Open, safety and tag this(these) circuit breaker(s):
Subtask 46-26-17-010-051-A ** ON A/C NOT FOR ALL 4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | FOMAX | 67TA | J01 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | FOMAX | 67TA | R12 |
Subtask 46-26-17-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the FOMAX Wi-Fi Antenna
(1) Disconnect the electrical connector (6).
(2) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(3) Hold the FOMAX Wi-Fi antenna (1) and remove the nut (5), wave washer (4) and washer (3).
(4) Remove the FOMAX Wi-Fi antenna (1) from the bracket (2).
(1) Disconnect the electrical connector (6).
(2) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(3) Hold the FOMAX Wi-Fi antenna (1) and remove the nut (5), wave washer (4) and washer (3).
(4) Remove the FOMAX Wi-Fi antenna (1) from the bracket (2).
FOMAX Wi-Fi Antenna