Detailed Inspection of the Compressor Inlet Filter
TASK 38-42-00-210-001-A
Detailed Inspection of the Compressor Inlet Filter
1. Reason for the Job
Refer to the MPD TASK: 384241-01
DETAILED INSPECTION OF COMPRESSOR INLET FILTER.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Expendable Parts
D. Referenced Information
3. Job Set-up
Subtask 38-42-00-861-055-A ** ON A/C NOT FOR ALL Subtask 38-42-00-865-058-A ** ON A/C NOT FOR ALL
Subtask 38-42-00-210-053-A ** ON A/C NOT FOR ALL
Subtask 38-42-00-410-055-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:26:01 UTC
Detailed Inspection of the Compressor Inlet Filter
1. Reason for the Job
Refer to the MPD TASK: 384241-01
DETAILED INSPECTION OF COMPRESSOR INLET FILTER.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | 1 | PLIERS - RETAINING RING (T96-1 TYPE) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 137 | BAY BETW AFT PART. BULKHEAD OF FWD CARGO |
| 172 | AFT CABIN U/FLOOR COMPARTMENT |
| 162DW |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 2 | RETAINING RING | AIPC 38-42-51-01-010 |
| 1 | INLET FILTER | AIPC 38-42-51-01-020 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 25-55-12-000-001-A | Removal of the Aft Cargo-Compartment Partition at FR65 |
| TASK 25-55-12-400-001-A | Installation of the Aft Cargo-Compartment Partition at FR65 |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-002-A | Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
Subtask 38-42-00-861-055-A ** ON A/C NOT FOR ALL Subtask 38-42-00-865-058-A ** ON A/C NOT FOR ALL
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
Subtask 38-42-00-010-055-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-AIR-COMPRESSOR | 19MD | F01 |
C. Get Access
(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put an ACCESS PLATFORM 2M (6 FT) in position at the AFT cargo compartment door.
(3) Set aft cargo-compartment light switch 8LU to the ON position.
(4) Remove partition 162DW (Ref. AMM TASK 25-55-12-000-001).
4. Procedure(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put an ACCESS PLATFORM 2M (6 FT) in position at the AFT cargo compartment door.
(3) Set aft cargo-compartment light switch 8LU to the ON position.
(4) Remove partition 162DW (Ref. AMM TASK 25-55-12-000-001).
Subtask 38-42-00-210-053-A ** ON A/C NOT FOR ALL
A. Detailed Inspection of the Compressor Inlet Filter.
(1) Remove the retaining ring (2) using the PLIERS - RETAINING RING (T96-1 TYPE).
(2) Remove the inlet filter (1).
(3) Examine the inlet filter (1) for damage/blocked, if necessary replace the AIPC 38-42-51-01-020 INLET FILTER (1).
(4) Install the inlet filter (1).
(5) Examine the retaining ring (2) for damage, if necessary replace the AIPC 38-42-51-01-010 RETAINING RING (2).
(6) Install the retaining ring (2).
5. Close-up(1) Remove the retaining ring (2) using the PLIERS - RETAINING RING (T96-1 TYPE).
(2) Remove the inlet filter (1).
(3) Examine the inlet filter (1) for damage/blocked, if necessary replace the AIPC 38-42-51-01-020 INLET FILTER (1).
(4) Install the inlet filter (1).
(5) Examine the retaining ring (2) for damage, if necessary replace the AIPC 38-42-51-01-010 RETAINING RING (2).
(6) Install the retaining ring (2).
Subtask 38-42-00-410-055-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partition 162DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set aft cargo-compartment light switch 8LU to the OFF position.
(4) Close aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002).
(5) Remove the access platform(s).
(6) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
Subtask 38-42-00-865-059-A ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partition 162DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set aft cargo-compartment light switch 8LU to the OFF position.
(4) Close aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002).
(5) Remove the access platform(s).
(6) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 38-42-00-862-055-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-AIR-COMPRESSOR | 19MD | F01 |
Compressor Inlet Filter