Installation of the Air Filter
TASK 38-41-42-400-001-A
Installation of the Air Filter
1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Expendable Parts
D. Referenced Information
3. Job Set-up
Subtask 38-41-42-860-050-A
Subtask 38-41-42-420-051-A ** ON A/C NOT FOR ALL
Subtask 38-41-42-410-051-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:26:00 UTC
Installation of the Air Filter
1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | Torque wrench: range to between 1.2 and 1.1 m.daN (106.19 and 97.35 lbf.in ) ![]() |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 130 | FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX |
| 170 | AFT CAB U/FLOOR COMPT AFT BHD OF BULK |
| 131PW | |
| 161DW |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 5 | ORING | AIPC 38-41-03-09-130 |
| 5 | ORING | AIPC 38-41-03-09-160 |
| 5 | O-RING | AIPC 38-41-04-12-080 |
| 5 | ORING | AIPC 38-41-83-05-270 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 12-15-38-613-001-A | Fill the Potable Water Tank System (Aircraft Electrical Power Available) |
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 25-54-12-400-001-A | Installation of the Forward Cargo-Compartment Partition |
| TASK 25-55-12-400-001-A | Installation of the Aft Cargo-Compartment Partition at FR65 |
| TASK 38-10-00-614-002-A | Depressurization of the Potable Water System |
| TASK 38-41-00-790-001-A | Leak Check of the Components in the Air Supply System |
| TASK 52-30-00-860-002-A | Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-004-A | Close the FWD or Aft Cargo-Compartment Door with the Hand Pump |
Subtask 38-41-42-860-050-A
A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the potable water system is depressurized (Ref. AMM TASK 38-10-00-614-002).
Subtask 38-41-42-865-051-A (1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the potable water system is depressurized (Ref. AMM TASK 38-10-00-614-002).
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-AIR-COMPRESSOR | 19MD | F01 |
Subtask 38-41-42-420-051-A ** ON A/C NOT FOR ALL
A. Installation of the Air Filter 4210MM
(2) Install the new AIPC 38-41-04-12-080 O-RING (5) to the check valve 4205MM (6).
(3) Install the check valve 4205MM (6) in the air filter 4210MM (4).
(4) Put the air filter assembly 4210MM (4) in position.
(5) Install the bolts (8), the washers (2) and the nuts (3).
(6) Connect and tighten the connections (1) and (7).
(7) TORQUE the connections (1) and (7) to between 1.2 and 1.1 m.daN (106.19 and 97.35 lbf.in )
.
Subtask 38-41-42-420-051-B ** ON A/C NOT FOR ALL WARNING:
DO NOT TOUCH THE UNIT UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS WHEN YOU DO THE MAINTENANCE TASK(S).
(1) Remove the blanking plugs. (2) Install the new AIPC 38-41-04-12-080 O-RING (5) to the check valve 4205MM (6).
(3) Install the check valve 4205MM (6) in the air filter 4210MM (4).
(4) Put the air filter assembly 4210MM (4) in position.
(5) Install the bolts (8), the washers (2) and the nuts (3).
(6) Connect and tighten the connections (1) and (7).
(7) TORQUE the connections (1) and (7) to between 1.2 and 1.1 m.daN (106.19 and 97.35 lbf.in )
. A. Installation of the Air Filter 4210MM
(2) Select the applicable new O-ring (5):
(3) Install the O-ring (5) to the check valve 4205MM (6).
(4) Install the check valve 4205MM (6) in the air filter 4210MM (4).
(5) Put the air filter assembly 4210MM (4) in position.
(6) Install the bolts (8), the washers (2) and the nuts (3).
(7) Connect and tighten the connections (1) and (7).
(8) TORQUE the connections (1) and (7) to between 1.2 and 1.1 m.daN (106.19 and 97.35 lbf.in )
.
Subtask 38-41-42-865-052-A WARNING:
DO NOT TOUCH THE UNIT UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS WHEN YOU DO THE MAINTENANCE TASK(S).
(1) Remove the blanking plugs. (2) Select the applicable new O-ring (5):
(3) Install the O-ring (5) to the check valve 4205MM (6).
(4) Install the check valve 4205MM (6) in the air filter 4210MM (4).
(5) Put the air filter assembly 4210MM (4) in position.
(6) Install the bolts (8), the washers (2) and the nuts (3).
(7) Connect and tighten the connections (1) and (7).
(8) TORQUE the connections (1) and (7) to between 1.2 and 1.1 m.daN (106.19 and 97.35 lbf.in )
. B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 38-41-42-613-050-A Subtask 38-41-42-710-050-A 5. Close-up| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-AIR-COMPRESSOR | 19MD | F01 |
Subtask 38-41-42-410-051-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partition 161DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set CARGO COMPT LIGHT switch 8LU to OFF.
(4) Remove the access platform(s).
(5) Close the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002) or (Ref. AMM TASK 52-30-00-860-004).
Subtask 38-41-42-410-051-B ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partition 161DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set CARGO COMPT LIGHT switch 8LU to OFF.
(4) Remove the access platform(s).
(5) Close the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002) or (Ref. AMM TASK 52-30-00-860-004).
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partition 131PW (Ref. AMM TASK 25-54-12-400-001).
(3) Set CARGO COMPT LIGHT switch 6LU to OFF.
(4) Remove the access platform(s).
(5) Close the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-002) or (Ref. AMM TASK 52-30-00-860-004).
Subtask 38-41-42-862-050-A (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partition 131PW (Ref. AMM TASK 25-54-12-400-001).
(3) Set CARGO COMPT LIGHT switch 6LU to OFF.
(4) Remove the access platform(s).
(5) Close the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-002) or (Ref. AMM TASK 52-30-00-860-004).
Air Filter 4210MM