Replacement of the Packings of the Waste Drain Valve
TASK 38-31-72-960-001-A
Replacement of the Packings of the Waste Drain Valve
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Expendable Parts
E. Referenced Information
3. Job Set-up
Subtask 38-31-72-861-052-A Subtask 38-31-72-010-052-A
Subtask 38-31-72-960-050-A
Subtask 38-31-72-613-051-A Subtask 38-31-72-410-051-A
[Rev.10 from 2021]
2026.04.01 01:21:03 UTC
Replacement of the Packings of the Waste Drain Valve
WARNING:
ALWAYS USE RUBBER GLOVES WHEN YOU DO WORK:
- ON THE TOILET WASTE SYSTEM, OR
- ON PARTS THAT HAVE CONTAMINATION FROM THE WASTE SYSTEM.
CAUTION:
MAKE SURE THAT THE INSULATION DOES NOT STOP THE OPERATION OF THE VALVE.
FIN: 3345MM
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.03FAB1) | Mineral Oil base Grease-- Vaseline or Petrolatum - |
| (Material No.11GCA1) | Deodorant-Aircraft Toilets - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 172AR |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 4 | PACKING | AIPC 38-31-72-01-090 |
| 2 | PACKING | AIPC 38-31-72-01-160 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 12-16-38-613-001-A | Servicing of the Toilet System |
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 38-31-00-680-001-A | Draining of the Toilet System |
Subtask 38-31-72-861-052-A Subtask 38-31-72-010-052-A
B. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) in position at the waste service panel 172AR.
(2) Open the waste service panel 172AR.
(3) Open the waste outlet cover.
Subtask 38-31-72-860-051-A (1) Put the ACCESS PLATFORM 2M (6 FT) in position at the waste service panel 172AR.
(2) Open the waste service panel 172AR.
(3) Open the waste outlet cover.
C. Aircraft Maintenance Configuration
(1) Drain and flush the waste holding tank (Ref. AMM TASK 38-31-00-680-001).
(2) Disinfect the Toilet System
(a) Put 2 l (0.5283 USgal) of Deodorant-Aircraft Toilets - - (Material No.11GCA1) in each toilet bowl and flush them through.
(3) Remove the drain hose which you used for for the draining procedure.
4. Procedure(1) Drain and flush the waste holding tank (Ref. AMM TASK 38-31-00-680-001).
(2) Disinfect the Toilet System
(a) Put 2 l (0.5283 USgal) of Deodorant-Aircraft Toilets - - (Material No.11GCA1) in each toilet bowl and flush them through.
(3) Remove the drain hose which you used for for the draining procedure.
Subtask 38-31-72-960-050-A
A. Replacement of the Packings
(1) Remove the packings (2) and (4) as follows:
(a) Remove the packing (2) from the inner flap (1) and discard it.
(b) Remove the packing (4) from the cap (3) and discard it.
(c) Clean the inner flap (1) and the cap (3) with Textile-Lint free Cotton - (Material No.14SBA1) .
(2) Install the packings (2) and (4) as follows:
(a) Apply a thin layer of Mineral Oil base Grease-- Vaseline or Petrolatum - (Material No.03FAB1) on a new AIPC 38-31-72-01-160 PACKING (2) and install it on the inner flap (1).
(b) Apply a thin layer of Mineral Oil base Grease-- Vaseline or Petrolatum - (Material No.03FAB1) on a new AIPC 38-31-72-01-090 PACKING (4) and install it on the cap (3).
Subtask 38-31-72-790-050-A (1) Remove the packings (2) and (4) as follows:
(a) Remove the packing (2) from the inner flap (1) and discard it.
(b) Remove the packing (4) from the cap (3) and discard it.
(c) Clean the inner flap (1) and the cap (3) with Textile-Lint free Cotton - (Material No.14SBA1) .
(2) Install the packings (2) and (4) as follows:
(a) Apply a thin layer of Mineral Oil base Grease-- Vaseline or Petrolatum - (Material No.03FAB1) on a new AIPC 38-31-72-01-160 PACKING (2) and install it on the inner flap (1).
(b) Apply a thin layer of Mineral Oil base Grease-- Vaseline or Petrolatum - (Material No.03FAB1) on a new AIPC 38-31-72-01-090 PACKING (4) and install it on the cap (3).
B. Do this Leak Test
(1) Make sure that the inner flap is closed.
(2) Set the drain lever 3341MM to the DRAIN position.
(3) Fill the waste tank with approximately 10 l (2.6417 USgal) of water.
(4) Examine the inner flap and make sure there are no leaks.
(5) Leaks are not permitted.
Subtask 38-31-72-680-052-A 5. Close-up(1) Make sure that the inner flap is closed.
(2) Set the drain lever 3341MM to the DRAIN position.
(3) Fill the waste tank with approximately 10 l (2.6417 USgal) of water.
(4) Examine the inner flap and make sure there are no leaks.
(5) Leaks are not permitted.
Subtask 38-31-72-613-051-A Subtask 38-31-72-410-051-A
B. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
Subtask 38-31-72-862-051-A (1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
Waste Drain Valve 3345MM