DOC AIRBUS | AMM A320FInstallation of the Quantity Transmitter
TASK 38-13-11-400-001-A
Installation of the Quantity Transmitter
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Expendable Parts
D. Referenced Information
3. Job Set-up
Subtask 38-13-11-860-051-A ** ON A/C NOT FOR ALL
Subtask 38-13-11-420-050-B ** ON A/C NOT FOR ALL
Subtask 38-13-11-410-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:25:42 UTC
Installation of the Quantity Transmitter
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 138 | BAY BETW AFT PART. BULKHEAD OF FWD CARGO |
| 170 | AFT CAB U/FLOOR COMPT AFT BHD OF BULK |
| 161DW, 162DW | |
| 242CF |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 2 | PACKING | AIPC 38-13-11-06-010 |
| 5 | GASKET | AIPC 38-13-11-06-010 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 12-15-38-613-001-A | Fill the Potable Water Tank System (Aircraft Electrical Power Available) |
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 25-21-41-000-001-A | Removal of the Passenger Seats |
| TASK 25-21-41-400-001-A | Installation of the Passenger Seats |
| TASK 25-28-41-000-001-A | Removal of the Textile Floor Covering |
| TASK 25-28-41-400-001-A | Installation of the Textile Floor Covering |
| TASK 25-55-12-000-001-A | Removal of the Aft Cargo-Compartment Partition at FR65 |
| TASK 25-55-12-400-001-A | Installation of the Aft Cargo-Compartment Partition at FR65 |
| TASK 38-10-00-614-001-A | Pressurization of the Potable Water System from a Ground Air Supply |
| TASK 38-10-00-670-002-A | Disinfection of Potable Water System and Discard of Water Filter Elements, if Installed |
| TASK 38-11-41-400-002-A | Installation of the Potable Water Tank |
| TASK 38-13-00-710-001-A | Operational Test of the Quantity Indicating System |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-002-A | Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-003-A | Open the FWD or Aft Cargo-Compartment Door with the Hand Pump |
| TASK 52-30-00-860-004-A | Close the FWD or Aft Cargo-Compartment Door with the Hand Pump |
| TASK 52-30-00-860-006-A | Open the Bulk Cargo-Compartment Door |
| TASK 52-30-00-860-008-A | Close the Bulk Cargo-Compartment Door |
| TASK 53-32-12-000-002-A | Removal of the Cabin Floor Panels |
| TASK 53-32-12-400-002-A | Installation of the Cabin Floor Panels |
Removal/Installation of the Quantity Transmitter 3MASubtask 38-13-11-860-051-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the aft cargo-compartment door is open (Ref. AMM TASK 52-30-00-860-001) or (Ref. AMM TASK 52-30-00-860-003).
(3) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position below the aft cargo-compartment door.
(4) Make sure that CARGO COMPT LIGHT switch 8LU is set to ON.
(5) Make sure that partitions 161DW and 162DW are removed (Ref. AMM TASK 25-55-12-000-001).
Subtask 38-13-11-860-051-B ** ON A/C NOT FOR ALL (1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the aft cargo-compartment door is open (Ref. AMM TASK 52-30-00-860-001) or (Ref. AMM TASK 52-30-00-860-003).
(3) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position below the aft cargo-compartment door.
(4) Make sure that CARGO COMPT LIGHT switch 8LU is set to ON.
(5) Make sure that partitions 161DW and 162DW are removed (Ref. AMM TASK 25-55-12-000-001).
A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) In the cabin, make sure that the right passenger seats from frame 35 to frame 36 are removed (Ref. AMM TASK 25-21-41-000-001).
(3) Make sure that the right textile-floor covering from frame 35 to frame 36 is removed (Ref. AMM TASK 25-28-41-000-001).
(4) Make sure that floor panel 242CF is removed (Ref. AMM TASK 53-32-12-000-002).
Subtask 38-13-11-860-051-J ** ON A/C NOT FOR ALL (1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) In the cabin, make sure that the right passenger seats from frame 35 to frame 36 are removed (Ref. AMM TASK 25-21-41-000-001).
(3) Make sure that the right textile-floor covering from frame 35 to frame 36 is removed (Ref. AMM TASK 25-28-41-000-001).
(4) Make sure that floor panel 242CF is removed (Ref. AMM TASK 53-32-12-000-002).
A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the bulk cargo-compartment door is open (Ref. AMM TASK 52-30-00-860-006).
(3) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position below the bulk cargo-compartment door.
(4) Make sure that CARGO COMPT LIGHT switch 18LU is set to ON.
(5) Make sure that partitions 161DW and 162DW are removed (Ref. AMM TASK 25-55-12-000-001).
Subtask 38-13-11-865-054-A (1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the bulk cargo-compartment door is open (Ref. AMM TASK 52-30-00-860-006).
(3) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position below the bulk cargo-compartment door.
(4) Make sure that CARGO COMPT LIGHT switch 18LU is set to ON.
(5) Make sure that partitions 161DW and 162DW are removed (Ref. AMM TASK 25-55-12-000-001).
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
Subtask 38-13-11-560-050-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | WATER SYSTEM-QANT-IND | 1MA | B01 |
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-QUANT-IND | 1MA | B06 |
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-AIR-COMPRESSOR | 19MD | F01 |
C. Preparation for Installation
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
4. Procedure(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
Subtask 38-13-11-420-050-B ** ON A/C NOT FOR ALL
A. Installation of the Quantity Transmitter 3MA
(1) Install a new AIPC 38-13-11-06-010 PACKING (2) on the transmitter.
(2) Remove the blanking plug from the potable water tank.
(3) Install the quantity transmitter (1) into the potable water tank.
(4) Install the washers (3) and the nuts (4).
(5) Turn the potable water tank into position.
(6) Remove the PLUG-BLANKING from each disconnected line end.
(7) Connect all the connections and the attachment clamps (Ref. AMM TASK 38-11-41-400-002).
(8) Remove the CAP-BLANKING from each electrical connector and receptacle.
(9) Connect the electrical connector (5) to the quantity transmitter (1).
Subtask 38-13-11-420-050-C ** ON A/C NOT FOR ALL (1) Install a new AIPC 38-13-11-06-010 PACKING (2) on the transmitter.
(2) Remove the blanking plug from the potable water tank.
(3) Install the quantity transmitter (1) into the potable water tank.
(4) Install the washers (3) and the nuts (4).
(5) Turn the potable water tank into position.
(6) Remove the PLUG-BLANKING from each disconnected line end.
(7) Connect all the connections and the attachment clamps (Ref. AMM TASK 38-11-41-400-002).
(8) Remove the CAP-BLANKING from each electrical connector and receptacle.
(9) Connect the electrical connector (5) to the quantity transmitter (1).
A. Installation of the Quantity Transmitter 3MA
(1) Install a new AIPC 38-13-11-06-010 PACKING (2) on the transmitter.
(2) Remove the blanking plug from the potable water tank (6).
(3) Install the quantity transmitter (1) into the potable water tank.
(4) Install the washers (3) and the nuts (4).
(5) Remove the CAP-BLANKING from each electrical connector and receptacle.
(6) Connect the electrical connector (5) to the quantity transmitter (1).
Subtask 38-13-11-420-050-D ** ON A/C NOT FOR ALL (1) Install a new AIPC 38-13-11-06-010 PACKING (2) on the transmitter.
(2) Remove the blanking plug from the potable water tank (6).
(3) Install the quantity transmitter (1) into the potable water tank.
(4) Install the washers (3) and the nuts (4).
(5) Remove the CAP-BLANKING from each electrical connector and receptacle.
(6) Connect the electrical connector (5) to the quantity transmitter (1).
A. Installation of the Quantity Transmitter
(1) Install a new AIPC 38-13-11-06-010 GASKET (5) on the quantity transmitter (4).
(2) Remove the PLUG - BLANKING from the potable water tank (6).
(3) Put the quantity transmitter (4) in its correct installation position.
(4) Install the washers (3) and the nuts (2).
(5) Tighten the nuts (2).
(6) Turn the potable water tank (6) back to its correct position.
(7) Install the connections and attach the clamps to the potable water tank (6) (Ref. AMM TASK 38-11-41-400-002).
(8) Remove the CAP-BLANKING from each electrical connector and receptacle.
Subtask 38-13-11-860-050-A (1) Install a new AIPC 38-13-11-06-010 GASKET (5) on the quantity transmitter (4).
(2) Remove the PLUG - BLANKING from the potable water tank (6).
(3) Put the quantity transmitter (4) in its correct installation position.
(4) Install the washers (3) and the nuts (2).
(5) Tighten the nuts (2).
(6) Turn the potable water tank (6) back to its correct position.
(7) Install the connections and attach the clamps to the potable water tank (6) (Ref. AMM TASK 38-11-41-400-002).
(8) Remove the CAP-BLANKING from each electrical connector and receptacle.
CAUTION:
MAKE SURE THAT THE ELECTRICAL CONNECTORS ARE CLEAN BEFORE YOU CONNECT THEM. SOLID AND/OR LIQUID CONTAMINATION CAN CAUSE DAMAGE TO THE COMPONENTS.
(9) Connect the electrical connector (1) to the quantity transmitter (4). B. Preparation for Test
(1) Aircraft Maintenance Configuration
(2) Fill and service the potable water tank (Ref. AMM TASK 12-15-38-613-001).
(3) Remove the WARNING NOTICE(S).
(4) Pressurize the potable water system (Ref. AMM TASK 38-10-00-614-001).
(5) Examine the water tank for leaks, leaks are not permitted.
Subtask 38-13-11-865-053-A (1) Aircraft Maintenance Configuration
(2) Fill and service the potable water tank (Ref. AMM TASK 12-15-38-613-001).
(3) Remove the WARNING NOTICE(S).
(4) Pressurize the potable water system (Ref. AMM TASK 38-10-00-614-001).
(5) Examine the water tank for leaks, leaks are not permitted.
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 38-13-11-710-050-A Subtask 38-13-11-670-050-A 5. Close-up| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | WATER SYSTEM-QANT-IND | 1MA | B01 |
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-QUANT-IND | 1MA | B06 |
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WATER SYS-AIR-COMPRESSOR | 19MD | F01 |
Subtask 38-13-11-410-050-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partitions 161DW and 162DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set CARGO COMPT LIGHT switch 8LU to OFF.
(4) Remove the access platform(s).
(5) Close the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002) or (Ref. AMM TASK 52-30-00-860-004).
Subtask 38-13-11-410-050-B ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partitions 161DW and 162DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set CARGO COMPT LIGHT switch 8LU to OFF.
(4) Remove the access platform(s).
(5) Close the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002) or (Ref. AMM TASK 52-30-00-860-004).
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install floor panel 242CF (Ref. AMM TASK 53-32-12-400-002).
(3) Install the right textile-floor covering from frame 35 to frame 36 (Ref. AMM TASK 25-28-41-400-001).
(4) Install the right passenger seats from frame 35 to frame 36 (Ref. AMM TASK 25-21-41-400-001).
Subtask 38-13-11-410-050-D ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install floor panel 242CF (Ref. AMM TASK 53-32-12-400-002).
(3) Install the right textile-floor covering from frame 35 to frame 36 (Ref. AMM TASK 25-28-41-400-001).
(4) Install the right passenger seats from frame 35 to frame 36 (Ref. AMM TASK 25-21-41-400-001).
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partitions 161DW and 162DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set CARGO COMPT LIGHT switch 18LU to OFF.
(4) Remove the access platform(s).
(5) Close the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-008).
Subtask 38-13-11-862-050-A (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install partitions 161DW and 162DW (Ref. AMM TASK 25-55-12-400-001).
(3) Set CARGO COMPT LIGHT switch 18LU to OFF.
(4) Remove the access platform(s).
(5) Close the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-008).