Removal of the TCAS Computer

TASK 34-43-34-000-001-B
Removal of the TCAS Computer

FIN: 1SG ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 1M(3 FT)
No specific	1	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
824

C. Referenced Information

REFERENCE	DESIGNATION
TCAS Computer

3. Job Set-up
Subtask 34-43-34-865-080-A ** ON A/C NOT FOR ALL

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	COM NAV/TCAS	4SG	K10

Subtask 34-43-34-010-056-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Put the ACCESS PLATFORM 1M(3 FT) in position at the access door 824 in zone 128.
(2) Open the access door 824.

4. Procedure
Subtask 34-43-34-020-056-A ** ON A/C NOT FOR ALL

A. Removal of the TCAS Computer

TCAS Computer ** ON A/C NOT FOR ALL

(1) Loosen the nuts (4).
(2) Lower the nuts (4).
(3) Pull the TCAS computer (1) on its rack (3) to disconnect the electrical connectors (2).
(4) Remove the TCAS computer (1) from its rack (3).
(5) Put CAP - BLANKING on the disconnected electrical connectors (2).

[Rev.9 from 2019] 2026.04.02 06:23:28 UTC