Read the TCAS CONFIGURATION Data of the TCAS

TASK 34-43-00-740-007-A
Read the TCAS CONFIGURATION Data of the TCAS

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-32-00-860-010-A	Procedure to Get Access to the SYSTEM REPORT/TEST NAV Page

3. Job Set-up
Subtask 34-43-00-860-139-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Do the procedure to get access to the SYSTEM REPORT/TEST NAV page on one MCDU (Ref. AMM TASK 31-32-00-860-010):

Push the NEXT PAGE function key until the TCAS menu page comes into view.

Subtask 34-43-00-865-144-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	COM NAV/TCAS	4SG	K10

4. Procedure
Subtask 34-43-00-740-058-A ** ON A/C NOT FOR ALL

A. Read the TCAS CONFIGURATION Data of the TCAS.

NOTE: The actions and the results of this procedure occur on the MCDU used.

ACTION	RESULT
1.Push the line key adjacent to the TCAS indication.	The TCAS page comes into view.
2.Push the line key adjacent to the DISCRETE CONFIGURATION indication.	The TCAS CONFIGURATION 1/2 page comes into view.
3.Push the down arrow key until the TCAS CONFIGURATION 2/2 page comes into view.	The TCAS CONFIGURATION 2/2 page comes into view.

5. Close-up
Subtask 34-43-00-860-140-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) On the MCDU, push the line key adjacent to the RETURN indication until the MAINTENANCE MENU 1/2 page comes into view.
(2) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.02 06:23:26 UTC