Installation of the Weather Radar Transceiver
TASK 34-41-33-400-802-A
Installation of the Weather Radar Transceiver
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 34-41-33-860-057-A ** ON A/C NOT FOR ALL
Subtask 34-41-33-420-052-A ** ON A/C NOT FOR ALL
Subtask 34-41-33-410-052-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 07:15:07 UTC
Installation of the Weather Radar Transceiver
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 1M(3 FT) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 121 | AVIONICS COMPARTMENT |
| 811 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 34-41-00-740-002-A | BITE Test of the Weather Radar |
Subtask 34-41-33-860-057-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Make sure that the ACCESS PLATFORM 1M(3 FT) is in position below access door 811.
(2) Make sure that access door 811 is open.
Subtask 34-41-33-865-070-A ** ON A/C NOT FOR ALL (1) Make sure that the ACCESS PLATFORM 1M(3 FT) is in position below access door 811.
(2) Make sure that access door 811 is open.
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/1 | 5SQ1 | K13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/2 | 5SQ2 | K14 |
Subtask 34-41-33-420-052-A ** ON A/C NOT FOR ALL
A. Installation of the Weather Radar Transceiver
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Remove the blanking caps from the electrical connectors (5).
(4) Make sure that the electrical connectors (5) are clean and in the correct condition.
(5) Put the weather radar transceiver (1) in position on its rack (4).
(6) Push the weather radar transceiver (1) on its rack (4) to connect the electrical connectors (5).
(7) Engage the nuts (3) on the lugs (2) and tighten them.
Subtask 34-41-33-865-071-A ** ON A/C NOT FOR ALL (1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Remove the blanking caps from the electrical connectors (5).
(4) Make sure that the electrical connectors (5) are clean and in the correct condition.
(5) Put the weather radar transceiver (1) in position on its rack (4).
(6) Push the weather radar transceiver (1) on its rack (4) to connect the electrical connectors (5).
(7) Engage the nuts (3) on the lugs (2) and tighten them.
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 34-41-33-740-052-A ** ON A/C NOT FOR ALL 5. Close-up| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/1 | 5SQ1 | K13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/2 | 5SQ2 | K14 |
Subtask 34-41-33-410-052-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close access door 811.
(3) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close access door 811.
(3) Remove the access platform(s).
Weather Radar Transceiver