Removal of the Taxi Light

TASK 33-46-12-000-001-A
Removal of the Taxi Light

WARNING: WEAR GLASSES AND PROTECTIVE CLOTHING WHEN YOU DO WORK ON THE LIGHT. THE LAMP IS PRESSURIZED AND AN EXPLOSION CAN OCCUR.

WARNING: DO NOT DISCONNECT THE ELECTRICAL CONNECTIONS FOR AT LEAST 2 MINUTES AFTER YOU DE-ENERGIZE THE ELECTRICAL CIRCUITS.

ZONE: 711
FIN: 8LR

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
711	NOSE GEAR

C. Referenced Information

REFERENCE	DESIGNATION
Taxi Light

3. Job Set-up
Subtask 33-46-12-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/EXT LT/TAXI AND TAKE OFF/TAXI	1LR	W08

4. Procedure
Subtask 33-46-12-020-050-C

A. Removal of the Taxi Light
(1) Disconnect the electrical connector (10) from the socket (8).
(2) Put the CAP - BLANKING on the disconnected electrical connector (10) and the socket (8).
(3) Remove the nut (6), the washer (5) and the screw (3).
(4) Remove the nuts (7), the washers (4) and the screws (2). During this operation, hold the light (9).
(5) Remove the light (9) from its support (1).

[Rev.10 from 2021] 2026.04.01 00:55:56 UTC