Removal of the Take Off Light

TASK 33-46-11-000-001-A
Removal of the Take Off Light

WARNING: WEAR GLASSES AND PROTECTIVE CLOTHING WHEN YOU DO WORK ON THE LIGHT. THE LAMP IS PRESSURIZED AND AN EXPLOSION CAN OCCUR.

WARNING: DO NOT DISCONNECT THE ELECTRICAL CONNECTIONS FOR AT LEAST 2 MINUTES AFTER YOU DE-ENERGIZE THE ELECTRICAL CIRCUITS.

ZONE: 711
FIN: 7LR

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
711	NOSE GEAR

C. Referenced Information

REFERENCE	DESIGNATION
Take off light

3. Job Set-up
Subtask 33-46-11-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/EXT LT/TAXI AND TAKE OFF/TO	3LR	W07

4. Procedure
Subtask 33-46-11-020-050-B

A. Removal of the Take Off Light
(1) Disconnect the electrical connector (8) from the socket (7).
(2) Put the CAP - BLANKING on the disconnected electrical connector (8) and the socket (7).
(3) Remove the nut (5), the washer (4) and the screw (3).
(4) Hold the light (6) and remove the nuts (9), the washers (10) and the screws (2).
(5) Remove the light (6) from its support (1).

[Rev.10 from 2021] 2026.04.01 00:55:47 UTC