Operational Test of the Service Area Lighting

TASK 33-31-00-710-001-A
Operational Test of the Service Area Lighting

WARNING: MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.

FIN: 4LJ
FIN: 5LJ
FIN: 6LJ

1. Reason for the Job
To make sure that the service area lighting operates correctly.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
FOR [4LJ] (MAINT. LIGHT)
FOR [5LJ] (MAINT. LIGHT)
312AR
FOR [6LJ] (MAINT. LIGHT)
315AL

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)

3. Job Set-up
Subtask 33-31-00-861-050-A

A. Energize the aircraft electrical circuit. (Ref. AMM TASK 24-41-00-861-002)

Subtask 33-31-00-865-052-A

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2001VU	LIGHT-SEC19	1LJ	E07
** ON A/C ALL
2001VU	LIGHT-APU	2LJ	E08
** ON A/C NOT FOR ALL
2001VU	LIGHT/SEC19	1LJ	E07

Subtask 33-31-00-010-050-A

C. Get Access
(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position:
(a) FOR [4LJ] (MAINT. LIGHT), [5LJ] (MAINT. LIGHT)
in Zone 312.
(b) FOR [6LJ] (MAINT. LIGHT)
below the APU compartment.
(2) Open the access door:
(a) FOR [4LJ] (MAINT. LIGHT), [5LJ] (MAINT. LIGHT)
open 312AR.
(b) FOR [6LJ] (MAINT. LIGHT)
open 315AL.

4. Procedure
Subtask 33-31-00-710-050-A

A. Test of the Service Area Lighting.
(1) Do this test.

ACTION	RESULT
1.In the section 19 service area:	In the section 19 service area:
set the control switch 3LJ to the ON position.	the service area lights 4LJ and 5LJ come on.
set the control switch 3LJ to the OFF position.	the service area lights 4LJ and 5LJ go off.
2.In the APU compartment:	In the APU compartment:
set the control switch 11LJ to the ON position.	the service area light 6LJ comes on.
set the control switch 11LJ to the OFF position.	the service area light 6LJ goes off.

5. Close-up
Subtask 33-31-00-410-050-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the access door:
(a) FOR [4LJ] (MAINT. LIGHT), [5LJ] (MAINT. LIGHT)
close 312AR.
(b) FOR [6LJ] (MAINT. LIGHT)
close 315AL.
(3) Remove the access platform(s).

Subtask 33-31-00-862-050-A

B. De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 00:54:10 UTC