W DOC AIRBUS | AMM A320F

Removal of the Cabin Attendant Work-Lights

TASK 33-27-12-000-001-A
Removal of the Cabin Attendant Work-Lights

WARNING: MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.
WARNING: BE VERY CAREFUL WHEN YOU DO WORK ON CIRCUIT BREAKER PANELS. THERE IS A HIGH VOLTAGE BEHIND THESE PANELS.
NOTE: The removal procedure is the same for all cabin attendant work-lights.
FIN: 10LZ ** ON A/C NOT FOR ALL
FIN: 11LZ ** ON A/C NOT FOR ALL
FIN: 12LZ ** ON A/C NOT FOR ALL
FIN: 14LZ ** ON A/C NOT FOR ALL
FIN: 15LZ ** ON A/C NOT FOR ALL
FIN: 18LZ ** ON A/C NOT FOR ALL
FIN: 204LZ ** ON A/C NOT FOR ALL
FIN: 205LZ ** ON A/C NOT FOR ALL
FIN: 210LZ ** ON A/C NOT FOR ALL
FIN: 211LZ ** ON A/C NOT FOR ALL
FIN: 214LZ ** ON A/C NOT FOR ALL
FIN: 215LZ ** ON A/C NOT FOR ALL
FIN: 218LZ ** ON A/C NOT FOR ALL
FIN: 4LZ ** ON A/C NOT FOR ALL
FIN: 5LZ ** ON A/C NOT FOR ALL
FIN: 521RHCS ** ON A/C NOT FOR ALL
FIN: 521RHF ** ON A/C NOT FOR ALL
FIN: 521RHG ** ON A/C NOT FOR ALL
FIN: 521RHK ** ON A/C NOT FOR ALL
FIN: 521RHN ** ON A/C NOT FOR ALL
FIN: 522RHF ** ON A/C NOT FOR ALL
FIN: 522RHG ** ON A/C NOT FOR ALL
FIN: 522RHK ** ON A/C NOT FOR ALL
FIN: 522RHN ** ON A/C NOT FOR ALL
FIN: 522RHS ** ON A/C NOT FOR ALL
FIN: 524RHF ** ON A/C NOT FOR ALL
FIN: 524RHG ** ON A/C NOT FOR ALL
FIN: 526RHF ** ON A/C NOT FOR ALL
FIN: 526RHG ** ON A/C NOT FOR ALL
FIN: 526RHK ** ON A/C NOT FOR ALL
FIN: 526RHN ** ON A/C NOT FOR ALL
FIN: 526RHS ** ON A/C NOT FOR ALL
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
CAP - BLANKING
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [10LZ]
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [10LZ] (ATT WORK LIGHT)
FOR [11LZ] (ATT WORK LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [14LZ]
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [204LZ] (STA LED READING LIGHT)
FOR [205LZ] (STA LED READING LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [210LZ] (STA LED READING LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [210LZ] (STA LED READING LIGHT)
FOR [218LZ] (STA LED READING LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [210LZ] (STA LED READING LIGHT)
FOR [211LZ] (STA LED READING LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [210LZ] (STA LED READING LIGHT)
FOR [211LZ] (STA LED READING LIGHT)
FOR [215LZ] (STA LED READING LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [214LZ] (STA LED READING LIGHT)
No specific
1
STEPLADDER 1.0 M (3.3 FT)
FOR [4LZ]
FOR [5LZ]
No specific
1
STEPLADDER 1.0 M (3.3 FT)
 B. Referenced Information
REFERENCE
DESIGNATION
F Cabin Attendant Work-Light ** ON A/C NOT FOR ALL
F Cabin Attendant Work-Light ** ON A/C NOT FOR ALL
F Cabin Attendant Work-Light ** ON A/C NOT FOR ALL
F Cabin Attendant Work-Light ** ON A/C NOT FOR ALL
F Cabin Attendant Work-Light ** ON A/C NOT FOR ALL
F Cabin Attendant Work-Light ** ON A/C NOT FOR ALL
F Cabin Attendant Work-Light. ** ON A/C NOT FOR ALL
3. Job Set-up
Subtask 33-27-12-865-055-A
A. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
2000VULIGHT-ATTND-WORK1LZJ03
Subtask 33-27-12-010-050-A ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [4LZ] , [5LZ]
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower the circuit breaker panel 2000VU.
   (2) FOR [10LZ]
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower the circuit breaker panel 2001VU.
   (3) FOR [14LZ]
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of the combi panel 2042VU.
Subtask 33-27-12-010-050-C ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [4LZ] (ATTND WORK LIGHT), [5LZ] (ATTND WORK LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower the circuit breaker panel 2000VU.
   (2) FOR [10LZ] (ATT WORK LIGHT), [11LZ] (ATT WORK LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower the circuit breaker panel 2001VU.
   (3) FOR [14LZ] (ATTND WORK LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of the combi panel 2042VU.
Subtask 33-27-12-010-050-AG ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
   (3) FOR [214LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side Passenger Service Unit (PSU) 612RH.
Subtask 33-27-12-010-050-AO ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [4LZ] (ATTND WORK LIGHT), [5LZ] (ATTND WORK LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower the circuit breaker panel 2000VU.
   (2) FOR [10LZ] (ATT WORK LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower the circuit breaker panel 2001VU.
   (3) FOR [14LZ] (ATTND WORK LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of the combi panel 2042VU.
Subtask 33-27-12-010-050-AQ ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
   (3) FOR [214LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of Passenger Service Unit (PSU) 612RH.
Subtask 33-27-12-010-050-AR ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT), [211LZ] (STA LED READING LIGHT), [215LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
   (3) FOR [214LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of Passenger Service Unit (PSU) 612RH.
Subtask 33-27-12-010-050-AT ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT), [211LZ] (STA LED READING LIGHT), [215LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
Subtask 33-27-12-010-050-B0 ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT), [211LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
   (3) FOR [214LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of PSU 612RH.
Subtask 33-27-12-010-050-BH ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT), [218LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
   (3) FOR [214LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Disengage and lower one side of Passenger Service Unit (PSU) 612RH.
Subtask 33-27-12-010-050-CL ** ON A/C NOT FOR ALL
B. Get Access
   (1) FOR [204LZ] (STA LED READING LIGHT), [205LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2000VU.
   (2) FOR [210LZ] (STA LED READING LIGHT), [218LZ] (STA LED READING LIGHT)
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related panel.
     (b) Lower circuit breaker panel 2001VU.
   (3) For the cabin attendant work-lights installed on the Passenger Service Unit (PSU):
     (a) Put the STEPLADDER 1.0 M (3.3 FT) in position below the related PSU.
     (b) Lower the PSU.
4. Procedure
Subtask 33-27-12-020-054-A ** ON A/C NOT FOR ALL
A. Removal of the Cabin Attendant Work-Lights
CAUTION: DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
CAUTION: MAKE SURE THAT THE ELECTRICAL CONNECTORS ARE CLEAN BEFORE YOU DISCONNECT OR CONNECT THEM. CONTAMINATION ON THE ELECTRICAL CONNECTORS CAN CAUSE DAMAGE TO EQUIPMENT.
CAUTION: MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
   (1) Disconnect the electrical connectors (2) from the cabin attendant work-lights (3).
   (2) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
   (3) Remove the circlips (1) and the cabin attendant work-lights (3).
Subtask 33-27-12-020-054-B ** ON A/C NOT FOR ALL
A. Removal of the Cabin Attendant Work-Lights
CAUTION: DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
CAUTION: MAKE SURE THAT THE ELECTRICAL CONNECTORS ARE CLEAN BEFORE YOU DISCONNECT OR CONNECT THEM. CONTAMINATION ON THE ELECTRICAL CONNECTORS CAN CAUSE DAMAGE TO EQUIPMENT.
CAUTION: MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
   (1) Disconnect the electrical connectors (2) from the cabin attendant work-lights (3).
   (2) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
   (3) Push each clip (1) until the cabin attendant work-lights (3) release.
   (4) Remove the cabin attendant work-lights (3).
[Rev.10 from 2021] 2026.04.01 00:54:01 UTC
"Aviabrain" 2025