DOC AIRBUS | AMM A320FRemoval of the Auxiliary/Mirror Lavatory Light
TASK 33-24-12-000-002-A
Removal of the Auxiliary/Mirror Lavatory Light
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 33-24-12-865-061-A
Subtask 33-24-12-020-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 00:53:37 UTC
Removal of the Auxiliary/Mirror Lavatory Light
FIN: 22LQ ** ON A/C NOT FOR ALL
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| REFERENCE | DESIGNATION |
|---|---|
Auxiliary/Mirror Lavatory LightSubtask 33-24-12-865-061-A
A. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CABIN | 79WL | H07 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CABIN | 79WL | H05 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | LAV FWD-OCCUPIED | 1WJ | F01 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | LAV FWD & MID-OCCUPIED | 1WJ | F01 |
| ** ON A/C ALL | |||
| 2001VU | LAVATORY AFT-OCCUPIED | 11WJ | B04 |
Subtask 33-24-12-020-053-A ** ON A/C NOT FOR ALL
A. Removal of the Auxiliary/Mirror Lavatory Light
(2) Remove the bulb (4) and/or the bulb (5).
(3) Push the locking catches (2) of the auxiliary/mirror light housing (3) to remove the auxiliary/mirror light housing (3).
(5) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
Subtask 33-24-12-020-053-B ** ON A/C NOT FOR ALL CAUTION:
DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP.
IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
(1) Remove the lens (6) of the auxiliary/mirror light housing (3). (2) Remove the bulb (4) and/or the bulb (5).
(3) Push the locking catches (2) of the auxiliary/mirror light housing (3) to remove the auxiliary/mirror light housing (3).
CAUTION:
MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
(4) Disconnect the electrical connectors (1) from the auxiliary/mirror light housing (3). (5) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
A. Removal of the Auxiliary/Mirror Lavatory Light (LED)
(1) Push the locking catches (2) of the auxiliary/mirror light housing (3) to remove the auxiliary/mirror light housing (3).
(3) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(1) Push the locking catches (2) of the auxiliary/mirror light housing (3) to remove the auxiliary/mirror light housing (3).
CAUTION:
MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
(2) Disconnect the electrical connectors (1) from the auxiliary/mirror light housing (3). (3) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.