Bite Test of the General Illumination with the MCDU

TASK 33-21-00-740-002-A
Bite Test of the General Illumination with the MCDU

1. Reason for the Job
To make sure that the general illumination operates correctly.
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 23-73-00-861-001-A	Energize the Cabin Intercommunication Data System (CIDS)
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-32-00-860-003-A	Procedure to Get Access to the SYSTEM REPORT/TEST/COM Page

3. Job Set-up
Subtask 33-21-00-861-051-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the Cabin Intercommunication Data System (CIDS) is energized
(Ref. AMM TASK 23-73-00-861-001).
(3) Procedure to get access to the SYSTEM REPORT/TEST/COM Page (Ref. AMM TASK 31-32-00-860-003).

Subtask 33-21-00-865-051-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	CAB LIGHT PWR-CEILING-AFT	307LG	H08
2000VU	CAB LIGHT PWR-CEILING-AFT	304LG	H07
2000VU	CAB LIGHT PWR-CEILING-FWD	306LG	H06
2000VU	CAB LIGHT PWR-CEILING-FWD	305LG	H05
2000VU	CAB LIGHT PWR-WINDOW-AFT	302LG	H04
2000VU	CAB LIGHT PWR-WINDOW-AFT	301LG	H03
2000VU	CAB LIGHT PWR-WINDOW-FWD	303LG	H02
2000VU	CAB LIGHT PWR-WINDOW-FWD	300LG	H01
2000VU	LIGHT-CABIN-ENTRY	308LG	J02
** ON A/C NOT FOR ALL
2000VU	LIGHT-HATRACK-STRIP	312LG	J05

4. Procedure
Subtask 33-21-00-740-050-A ** ON A/C NOT FOR ALL

A. BITE-test of the General Illumination on Multipurpose Control and Display Unit (MCDU) 3CA
(1) Do this test:

ACTION	RESULT
1.On the MCDU:	On the MCDU screen:
Push the line select key adjacent to the CIDS 1 indication.	The CIDS main menu page comes into view.
Push the line select key adjacent to the SYSTEM TESTS indication.	The SYSTEM/TESTS menu page comes into view.
Push the line select key adjacent to the ILLUMINATION TEST indication.	The ILLUMINATION TEST menu page comes into view. NOTE: It is necessary to wait for a minimum of two minutes between the two illumination tests.
Push the line select key adjacent to the START TEST indication.	TEST IN PROGRESS 180s shows on the display.
	In the cabin: All the cabin lights come on for approx. 180s.
	On the MCDU screen: TEST OK shows on the display.
Push the line select key adjacent to the RETURN indication.	The CIDS main menu page comes into view.

Subtask 33-21-00-740-050-B ** ON A/C NOT FOR ALL

A. BITE-test of the General Illumination on Multipurpose Control and Display Unit (MCDU) 3CA
(1) Do this test:

ACTION	RESULT
1.On the MCDU:	On the MCDU screen:
Push the line select key adjacent to the CIDS 1 indication.	The CIDS main menu page comes into view.
Push the line select key adjacent to the SYSTEM TESTS indication.	The SYSTEM/TESTS menu page comes into view.
Push the line select key adjacent to the ILLUMINATION TEST indication.	The ILLUMINATION TEST menu page comes into view. NOTE: It is necessary to wait for a minimum of two minutes between the two illumination tests.
Push the line select key adjacent to the START TEST indication.	TEST IN PROGRESS 180s shows on the display.
	In the cabin: All the cabin lights come on for approx. 180s.
	On the MCDU screen: TEST OK shows on the display.
Push the line select key adjacent to the RETURN indication.	The CIDS main menu page comes into view.

Subtask 33-21-00-740-050-C ** ON A/C NOT FOR ALL

A. BITE test of the General Illumination on Multipurpose Control and Display Unit (MCDU) 3CA
(1) Reset the CIDS.
(2) Do this test:

ACTION	RESULT
1.On the MCDU:	On the MCDU screen:
Push the line select key adjacent to the CIDS 1 indication.	The CIDS main menu page comes into view.
Push the line select key adjacent to the SYSTEM TESTS indication.	The SYSTEM/TESTS menu page comes into view.
Push the line select key adjacent to the ILLUMINATION TEST indication.	The ILLUMINATION TEST menu page comes into view. NOTE: It is necessary to wait for a minimum of two minutes between the two illumination tests.
Push the line select key adjacent to the START TEST indication.	TEST IN PROGRESS 180s shows on the display.
	In the cabin: All the cabin lights come on for approximately 180s.
	On the MCDU screen: TEST OK shows on the display.
Push the line select key adjacent to the RETURN indication.	The CIDS main menu page comes into view.

Subtask 33-21-00-740-050-GK ** ON A/C NOT FOR ALL

A. BITE test of the General Illumination on Multipurpose Control and Display Unit (MCDU) 3CA
(1) Do this test:

ACTION	RESULT
1.On the MCDU:	On the MCDU screen:
Push the line select key adjacent to the CIDS 1 indication.	The CIDS main menu page comes into view.
Push the line select key adjacent to the SYSTEM TESTS indication.	The SYSTEM/TESTS menu page comes into view.
Push the line select key adjacent to the ILLUMINATION TEST indication.	The ILLUMINATION TEST menu page comes into view. NOTE: We recommend that you wait for a minimum of two minutes between the two illumination tests.
Push the line select key adjacent to the START TEST indication.	TEST IN PROGRESS 180s shows on the display.
	In the cabin: All the cabin lights come on for approximately 180s.
	On the MCDU screen: TEST OK shows on the display. or If fault 332100 IU SRxx/DEU-A (200RHyy) shows on the display. Do a check of the lightstrip in the handrail at the shown Seat Row (SR). Ignore the fault, if the lightstrip in the handrail works correctly. Do the related troubleshooting procedure, if the lightstrip in the handrail does not work correctly.
Push the line select key adjacent to the RETURN indication.	The CIDS main menu page comes into view.

5. Close-up
Subtask 33-21-00-862-051-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to the serviceable condition.
(1) On the MCDU, set the BRT knob to the OFF position.
(2) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 00:53:15 UTC