Installation of the Map-Table Light Control-Box

TASK 33-12-18-400-802-A
Installation of the Map-Table Light Control-Box

CAUTION: DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.

ZONE: 211
ZONE: 212
FIN: 53LE ** ON A/C NOT FOR ALL
FIN: 54LE ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 33-12-00-710-001-A	Operational Test of the General Illumination
Map-Table Light Control-Box

3. Job Set-up
Subtask 33-12-18-865-060-A ** ON A/C NOT FOR ALL

A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
FOR FIN: 53LE (CTL BOXMAP TABLE LT, CAPT)
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05
FOR FIN: 54LE (CTL BOXMAP TABLE LT, F/O)
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06

4. Procedure
Subtask 33-12-18-420-053-A ** ON A/C NOT FOR ALL

A. Installation of the Map-Table Light Control-Box

NOTE: To make the installation easier, you can open the window.

(1) Connect the female terminal lugs (8) to the male terminal lugs of the map-table light control-box (7).
(2) Connect the two electrical connectors of the map-table light (2) to the two splices of the map-table light control-box (3).

NOTE: Make sure that you connect the wires of the same color.

(3) Install the map-table light control-box (4) in its housing of the structure (1).
(4) Tighten the four screws (6) and washers (5).

Subtask 33-12-18-865-061-A ** ON A/C NOT FOR ALL

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
FOR FIN: 53LE (CTL BOXMAP TABLE LT, CAPT)
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05
FOR FIN: 54LE (CTL BOXMAP TABLE LT, F/O)
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06

Subtask 33-12-18-710-053-A ** ON A/C NOT FOR ALL

C. Do the operational test (Ref. AMM TASK 33-12-00-710-001).

5. Close-up
Subtask 33-12-18-942-053-A ** ON A/C NOT FOR ALL

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 00:52:46 UTC