Removal of the Map-Table Light Control-Box

TASK 33-12-18-000-802-A
Removal of the Map-Table Light Control-Box

CAUTION: DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.

ZONE: 211
ZONE: 212
FIN: 53LE ** ON A/C NOT FOR ALL
FIN: 54LE ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
Map-Table Light Control-Box

3. Job Set-up
Subtask 33-12-18-865-059-A ** ON A/C NOT FOR ALL

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
FOR FIN: 53LE (CTL BOXMAP TABLE LT, CAPT)
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05
FOR FIN: 54LE (CTL BOXMAP TABLE LT, F/O)
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06

4. Procedure
Subtask 33-12-18-020-053-A ** ON A/C NOT FOR ALL

A. Removal of the Map-Table Light Control-Box
(1) Remove the four screws (6) and washers (5).
(2) Pull the map-table light control-box (4) out of its housing of the structure (1).
(3) Disconnect the two electrical connectors of the map-table light (2) from the two splices of the map-table light control-box (3).
(4) Disconnect the female terminal lugs (8) from the male terminal lugs of the map-table light control-box (7).

[Rev.10 from 2021] 2026.04.01 00:52:45 UTC