DOC AIRBUS | AMM A320FRemoval of the Flood-Light Control Boxes
TASK 33-12-17-000-802-A
Removal of the Flood-Light Control Boxes
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 33-12-17-865-056-A ** ON A/C NOT FOR ALL
Subtask 33-12-17-020-054-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 00:52:41 UTC
Removal of the Flood-Light Control Boxes
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
Main Panel and Pedestal Flood-Light Control-BoxesSubtask 33-12-17-865-056-A ** ON A/C NOT FOR ALL
A. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| FOR FIN: 50LE (CTL BOXSINGLE, FLOOD LT/PED) | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H08 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H06 |
| ** ON A/C NOT FOR ALL | |||
| FOR FIN: 52LE (CTL BOXDOUBLE, FLOOD LT/ MAIN PANEL) | |||
| 122VU | LIGHTING/FLOOD/CTR INST/PNL | 2LE | Z04 |
Subtask 33-12-17-020-054-A ** ON A/C NOT FOR ALL
A. Removal of the Pedestal Flood-Light Single-Control-Box (50LE)
(1) Loosen the two fasteners (2).
(2) Carefully pull the flood-light panel 112VU (1).
(3) Remove the two screws (11) and disconnect the electrical connector (10).
(4) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(5) Loosen the two screws (6) installed on the knob (5) but do not remove them.
(6) Remove the knob (5).
(7) Remove the two screws (4) and placard (3).
(8) Remove the nut (7) and washer (8).
(9) Remove the single control box (9).
Subtask 33-12-17-020-055-A ** ON A/C NOT FOR ALL (1) Loosen the two fasteners (2).
(2) Carefully pull the flood-light panel 112VU (1).
(3) Remove the two screws (11) and disconnect the electrical connector (10).
(4) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(5) Loosen the two screws (6) installed on the knob (5) but do not remove them.
(6) Remove the knob (5).
(7) Remove the two screws (4) and placard (3).
(8) Remove the nut (7) and washer (8).
(9) Remove the single control box (9).
B. Removal of the Main-Panel Flood-Light Double-Control-Box (52LE)
(1) Loosen the two fasteners (13).
(2) Carefully pull the flood light/integral-light panel 111VU (12).
(3) Remove the two screws (22) and disconnect the electrical connector (21).
(4) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(5) Loosen the two screws (17) installed on the knob (16) but do not remove them.
(6) Remove the knob (16).
(7) Remove the two screws (15) and placard (14).
(8) Remove the nut (18) and washer (19).
(9) Remove the double control box (20).
(1) Loosen the two fasteners (13).
(2) Carefully pull the flood light/integral-light panel 111VU (12).
(3) Remove the two screws (22) and disconnect the electrical connector (21).
(4) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(5) Loosen the two screws (17) installed on the knob (16) but do not remove them.
(6) Remove the knob (16).
(7) Remove the two screws (15) and placard (14).
(8) Remove the nut (18) and washer (19).
(9) Remove the double control box (20).