Installation of the Cockpit Dome Light
TASK 33-12-11-400-802-A
Installation of the Cockpit Dome Light
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 33-12-11-865-059-A ** ON A/C NOT FOR ALL
Subtask 33-12-11-160-052-A ** ON A/C NOT FOR ALL
Subtask 33-12-11-942-052-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 00:52:19 UTC
Installation of the Cockpit Dome Light
CAUTION:
DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP.
IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 33-12-00-710-001-A | Operational Test of the General Illumination |
Subtask 33-12-11-865-059-A ** ON A/C NOT FOR ALL
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H08 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H06 |
| ** ON A/C NOT FOR ALL | |||
| 122VU | LIGHTING/CKPT/DOME | 3LE | Y06 |
Subtask 33-12-11-160-052-A ** ON A/C NOT FOR ALL
A. Preparation for the Installation
(1) Clean the component interface and/or the adjacent area.
(2) Do an inspection of the component interface and/or the adjacent area.
Subtask 33-12-11-420-057-A ** ON A/C NOT FOR ALL (1) Clean the component interface and/or the adjacent area.
(2) Do an inspection of the component interface and/or the adjacent area.
B. Installation of the Dome Light Box
(1) Remove the CAP - BLANKING from the disconnected electrical connector (1) and receptacle (2).
(2) Install the dome light box (5).
(3) Tighten the four screws (4) and washers (3) that attach the dome light box (5).
(4) Connect the electrical connector (1) to the receptacle (2).
(5) With an ALLEN wrench, install the ceiling panels:
Subtask 33-12-11-865-060-A ** ON A/C NOT FOR ALL (1) Remove the CAP - BLANKING from the disconnected electrical connector (1) and receptacle (2).
(2) Install the dome light box (5).
(3) Tighten the four screws (4) and washers (3) that attach the dome light box (5).
(4) Connect the electrical connector (1) to the receptacle (2).
(5) With an ALLEN wrench, install the ceiling panels:
- For the Captain dome light: 211CC
- For the F/O dome light: 212CC
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 33-12-11-710-053-A ** ON A/C NOT FOR ALL 5. Close-up| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H08 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H06 |
| ** ON A/C NOT FOR ALL | |||
| 122VU | LIGHTING/CKPT/DOME | 3LE | Y06 |
Subtask 33-12-11-942-052-A ** ON A/C NOT FOR ALL
A. Make sure that the work area is clean and clear of tools and other items.
Cockpit Dome Light