Installation of the Brake Yellow Pressure Triple Indicator

TASK 32-44-21-400-001-A
Installation of the Brake Yellow Pressure Triple Indicator

ZONE: 211
FIN: 60GG

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-43-00-710-001-A	Operational Check of Alternate Braking System
TASK 32-45-00-710-001-A	Operational Check of the Parking Brake System
Brake Yellow Pressure Triple Indicator

3. Job Set-up
Subtask 32-44-21-865-051-A

A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	L/G/Y BRK/PRESS/IND	61GG	C10
** ON A/C NOT FOR ALL
49VU	ABCU &/Y BRK/PRESS IND	61GG	C10

4. Procedure
Subtask 32-44-21-420-050-A

A. Installation of the Brake Yellow Pressure Triple Indicator
(1) Remove the blanking caps from the electrical connectors.
(2) Connect the electrical connector (1) to the indicator (3).
(3) Install the indicator (3) in its housing.
(4) Tighten the screws (2).

Subtask 32-44-21-865-053-A

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	L/G/Y BRK/PRESS/IND	61GG	C10
** ON A/C NOT FOR ALL
49VU	ABCU &/Y BRK/PRESS IND	61GG	C10

Subtask 32-44-21-710-050-A

C. Operational test
(1) Do the operational test of the Alternate braking system . (Ref. AMM TASK 32-43-00-710-001)
(2) Do the operational test of the parking brake system . (Ref. AMM TASK 32-45-00-710-001)

5. Close-up
Subtask 32-44-21-942-050-A

A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

[Rev.10 from 2021] 2026.04.01 00:49:46 UTC