Removal of the Brake Yellow Pressure Triple Indicator

TASK 32-44-21-000-001-A
Removal of the Brake Yellow Pressure Triple Indicator

ZONE: 211
FIN: 60GG

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
Brake Yellow Pressure Triple Indicator

3. Job Set-up
Subtask 32-44-21-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	L/G/Y BRK/PRESS/IND	61GG	C10
** ON A/C NOT FOR ALL
49VU	ABCU &/Y BRK/PRESS IND	61GG	C10

4. Procedure
Subtask 32-44-21-020-050-A

A. Removal of the Brake Yellow Pressure Triple Indicator
(1) Loosen the two screws (2). Do not remove them.
(2) Pull the indicator (3) from its housing.
(3) Disconnect the electrical connector (1) and install the CAP - BLANKING.
(4) Remove the indicator (3).

[Rev.10 from 2021] 2026.04.01 00:49:45 UTC