Installation of the Axle Sleeve

TASK 32-41-12-400-002-A
Installation of the Axle Sleeve

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.03GBB1)	Synthetic Oil base Grease-General Purpose Clay Thickened -
(Material No.03GCB1)	Synthetic Oil base Grease-Landing Gear Wheel Bearing Lithium Thickened -
(Material No.08BBB1)	Non Aqueous Cleaner-- Petroleum Based -

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-41-12-400-001-A	Installation of the NLG Wheel
Axle Sleeve

3. Job Set-up
Subtask 32-41-12-640-052-A

A. Preparation for Installation
(1) Clean the axle (1) with Non Aqueous Cleaner-- Petroleum Based - (Material No.08BBB1) . Dry it with filtered compressed air .
(2) Lightly lubricate the axle (1) and the axle protective sleeve (2) with Synthetic Oil base Grease-General Purpose Clay Thickened - (Material No.03GBB1) or as alternative Synthetic Oil base Grease-Landing Gear Wheel Bearing Lithium Thickened - (Material No.03GCB1) .

4. Procedure
Subtask 32-41-12-420-051-A

A. Installation of the Axle Sleeve
(1) Install the axle sleeve (2).
(2) Install the retaining ring (3).

5. Close-up
Subtask 32-41-12-410-050-A

A. Close access
(1) Install the related wheel (Ref. AMM TASK 32-41-12-400-001).
(2) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 00:47:19 UTC