Remove NLG Actuating Cylinder and Airframe Attachment Pin and Sleeve for Special Detailed Inspection in Shop

TASK 32-31-22-920-001-A
Remove NLG Actuating Cylinder and Airframe Attachment Pin and Sleeve for Special Detailed Inspection in Shop

ZONE: 711
FIN: 2527GM

1. Reason for the Job
Refer to the MPD TASK: 323100-08
REMOVE NOSE LANDING GEAR ACTUATING CYLINDER AND AIRFRAME ATTACHMENT PIN AND SLEEVE FOR SPECIAL DETAILED INSPECTION IN SHOP

Task to be performed off aircraft in accordance with relevant CMM
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
711	NOSE GEAR

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-31-22-000-001-A	Removal of the NLG Actuating Cylinder
TASK 32-31-22-400-001-A	Installation of the NLG Actuating Cylinder

3. Job Set-up
Subtask 32-31-22-020-051-A

A. Removal of the Equipment
(1) Remove the NLG actuating cylinder (Ref. AMM TASK 32-31-22-000-001).

4. Procedure
Subtask 32-31-22-210-050-A

A. Special Detailed Inspection (Overhaul) of the NLG actuating cylinder and Airframe Attachment Pin and Sleeve (Off Aircraft)
(1) Send to the workshop the NLG actuating cylinder, airframe attachment pin and the sleeve, refer to MPD Appendix 7.

5. Close-up
Subtask 32-31-22-420-052-A

A. Installation of the Equipment
(1) Install the NLG actuating cylinder (Ref. AMM TASK 32-31-22-400-001).

[Rev.10 from 2021] 2026.04.01 00:44:49 UTC