Removal of the ECAM Control Panel

TASK 31-61-12-000-001-A
Removal of the ECAM Control Panel

ZONE: 210
FIN: 6WT

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

C. Referenced Information

REFERENCE	DESIGNATION
ECAM Control Panel

3. Job Set-up
Subtask 31-61-12-865-050-A

A. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	EIS/ECAM/CTL/PNL	15WT	E12
** ON A/C NOT FOR ALL
49VU	EIS/ECAM/CTL/PNL	15WT	E11

4. Procedure
Subtask 31-61-12-020-050-A

A. Removal of the ECAM Control Panel
(1) Loosen the quarter-turn fasteners (1).
(2) Remove the ECAM control panel (2) from its housing (5).
(3) Disconnect the connectors (4).
(4) Remove the ECAM control panel (2).
(5) Put CAP - BLANKING on the four electrical connectors (3) and (4).

[Rev.10 from 2021] 2026.04.01 00:38:11 UTC