Removal of the Loudspeakers
TASK 31-53-21-000-001-A
Removal of the Loudspeakers
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 31-53-21-865-050-A
Subtask 31-53-21-020-050-A
[Rev.10 from 2021]
2026.04.01 00:37:23 UTC
Removal of the Loudspeakers
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| REFERENCE | DESIGNATION |
|---|---|
Subtask 31-53-21-865-050-A
A. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| FOR FIN: 7WW (LOUD SPEAKERCAPT) | |||
| 49VU | CAPT/LOUD/SPKR | 5WW | F10 |
| FOR FIN: 8WW (LOUD SPEAKERF/O) | |||
| 121VU | EIS/F/O/LOUD/SPKR | 4WW | P08 |
Subtask 31-53-21-020-050-A
A. Removal of the Loudspeakers
(1) FOR [7WW] (LOUD SPEAKER-CAPT)
Remove the thermoformed cover from the left instrument panel.
(a) FOR [8WW] (LOUD SPEAKER-F/O)
Remove the thermoformed cover from the right instrument panel.
(2) Loosen the four locking screws (3). Hold the loudspeaker (4).
(3) Remove the loudspeaker (4) from its housing (5).
(4) Disconnect the connector (1) from its receptacle (2).
(5) Remove the loudspeaker (4).
(6) Put CAP - BLANKING on the electrical connectors (1) and (2).
(1) FOR [7WW] (LOUD SPEAKER-CAPT)
Remove the thermoformed cover from the left instrument panel.
(a) FOR [8WW] (LOUD SPEAKER-F/O)
Remove the thermoformed cover from the right instrument panel.
(2) Loosen the four locking screws (3). Hold the loudspeaker (4).
(3) Remove the loudspeaker (4) from its housing (5).
(4) Disconnect the connector (1) from its receptacle (2).
(5) Remove the loudspeaker (4).
(6) Put CAP - BLANKING on the electrical connectors (1) and (2).
Loudspeaker