Removal of the Personal Computer Memory Card (PCMCIA) of the FDIMU/DMU
TASK 31-36-00-000-001-A
Removal of the Personal Computer Memory Card (PCMCIA) of the FDIMU/DMU
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 31-36-00-861-067-A
Subtask 31-36-00-000-051-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 00:35:46 UTC
Removal of the Personal Computer Memory Card (PCMCIA) of the FDIMU/DMU
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | 1 | PCMCIA-CARD |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 128 | REAR AVIONIC COMPARTMENT |
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| 824 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 52-41-00-010-002-A | Open the Avionics Compartment Doors for Access |
| TASK 31-36-00-00-01 | AIDS INTERCONNECTION (DMU, DAR) - DESCRIPTION AND OPERATION |
| TASK 31-36-00-00-02 | AIDS INTERCONNECTION (DMU, DAR) - DESCRIPTION AND OPERATION |
Subtask 31-36-00-861-067-A
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-36-00-010-061-A (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
B. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) in position at access door 824 in zone 128.
(2) Open access door 824 (Ref. AMM TASK 52-41-00-010-002).
(3) For the location of the components, refer to the paragraph component location (Ref. AMM D/O 31-36-00-00).
Subtask 31-36-00-865-159-A (1) Put the ACCESS PLATFORM 2M (6 FT) in position at access door 824 in zone 128.
(2) Open access door 824 (Ref. AMM TASK 52-41-00-010-002).
(3) For the location of the components, refer to the paragraph component location (Ref. AMM D/O 31-36-00-00).
C. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | AIDS/DMU | 4TV | K15 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | AIDS & RCDR/FDIMU | 5TV | K15 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | AIDS & RCDR/FDIMU | 5TV | K38 |
Subtask 31-36-00-000-051-A ** ON A/C NOT FOR ALL
A. Removal of the Personal Computer Memory Card (PCMCIA)
Removal / Installation of the Personal Computer Memory Card (PCMCIA) ** ON A/C NOT FOR ALL
PCMCIA Card ** ON A/C NOT FOR ALL
(1) Make sure that both LED's (1) and (2) are off.
(2) Open the flap (5) to get access to the PCMCIA-CARD (4).
(3) Push the gray button (3) to remove the PCMCIA-CARD (4).
(4) Remove the PCMCIA-CARD (4).
(5) Close the flap (5) of the PCMCIA interface.
Subtask 31-36-00-000-051-C ** ON A/C NOT FOR ALL
Removal / Installation of the Personal Computer Memory Card (PCMCIA) ** ON A/C NOT FOR ALL
PCMCIA Card ** ON A/C NOT FOR ALL (2) Open the flap (5) to get access to the PCMCIA-CARD (4).
(3) Push the gray button (3) to remove the PCMCIA-CARD (4).
(4) Remove the PCMCIA-CARD (4).
(5) Close the flap (5) of the PCMCIA interface.
A. Removal of the Personal Computer Memory Card (PCMCIA)
(1) Open the door to get access to the PCMCIA-CARD.
(2) Remove the PCMCIA-CARD.
(3) Close the access door.
Subtask 31-36-00-000-051-E ** ON A/C NOT FOR ALL (1) Open the door to get access to the PCMCIA-CARD.
(2) Remove the PCMCIA-CARD.
(3) Close the access door.
A. Removal of the Personal Computer Memory Card (PCMCIA)
(1) Make sure that both LED's (1) and (2) are off.
(2) Open the door (3) to get access to the PCMCIA-CARD.
(3) Remove the PCMCIA-CARD.
(4) Close the access door (3).
Subtask 31-36-00-000-051-G ** ON A/C NOT FOR ALL (1) Make sure that both LED's (1) and (2) are off.
(2) Open the door (3) to get access to the PCMCIA-CARD.
(3) Remove the PCMCIA-CARD.
(4) Close the access door (3).
A. Removal of the Personal Computer Memory Card (PCMCIA)
(1) Make sure that the LEDs (1) and (2) are off.
(2) Open the access door (3).
(3) Remove the PCMCIA-CARD.
(4) Close the access door (3).
(1) Make sure that the LEDs (1) and (2) are off.
(2) Open the access door (3).
(3) Remove the PCMCIA-CARD.
(4) Close the access door (3).