Removal of the Printer

TASK 31-35-22-000-001-A
Removal of the Printer

ZONE: 210
FIN: 4TW

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
Printer

3. Job Set-up
Subtask 31-35-22-860-052-A

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)

Subtask 31-35-22-865-050-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J21
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J44

4. Procedure
Subtask 31-35-22-020-050-A

A. Removal of the Printer
(1) Loosen the four quarter-turn fasteners (1).
(2) Remove the printer (2) from its housing (5).
(3) Disconnect the connector (4) from the receptacle (3).
(4) Remove the printer (2).
(5) Put CAP - BLANKING on the electrical connectors (3) and (4).

[Rev.10 from 2021] 2026.04.01 00:35:15 UTC