Reactivation of the Waste-Water Drain Mast Heating-System
TASK 30-71-00-440-001-A
Reactivation of the Waste-Water Drain Mast Heating-System
MMEL 30-71-01A
WASTE WATER DRAIN MAST HEATING SYSTEM
MMEL 30-71-01B
WASTE WATER DRAIN MAST HEATING SYSTEM
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 30-71-00-861-050-A 4. Procedure
Subtask 30-71-00-865-073-A
Subtask 30-71-00-862-058-A
[Rev.10 from 2021]
2026.04.01 00:31:40 UTC
Reactivation of the Waste-Water Drain Mast Heating-System
ZONE: 200
1. Reason for the JobMMEL 30-71-01A
WASTE WATER DRAIN MAST HEATING SYSTEM
MMEL 30-71-01B
WASTE WATER DRAIN MAST HEATING SYSTEM
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TSM 30-71-00-810-801 | FWD Drain-mast Heater-Failure |
| TSM 30-71-00-810-802 | AFT Drain mast-Heater Failure |
| TSM 30-71-00-810-803 | Control Unit Failure of FWD Drainmast |
| TSM 30-71-00-810-804 | Control Unit Failure of AFT Drainmast |
| TSM 30-71-00-810-809 | MID Drainmast-Heater Failure |
| TSM 30-71-00-810-810 | Control Unit Failure of MID Drainmast |
Subtask 30-71-00-861-050-A 4. Procedure
Subtask 30-71-00-865-073-A
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 30-71-00-440-050-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | WASTE WIP-DRAINMAST-FWD | 1DU | B06 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | DRAINMAST-FWD | 1DU | B03 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | WASTE WIP-DRAINMAST-FWD | 1DU | B03 |
| ** ON A/C ALL | |||
| 2001VU | WASTE WIP-DRAINMAST-AFT | 11DU | E01 |
| ** ON A/C NOT FOR ALL | |||
| 2001VU | WASTE WIP-DRAINMAST-MID | 21DU | E02 |
B. Reactivation
(1) Do the trouble-shooting of the waste-water drainmast heating-system:
TSM 30-71-00-810-801 FWD Drainmast-Heater Failure
and/or
TSM 30-71-00-810-802 AFT Drainmast-Heater Failure
and/or
TSM 30-71-00-810-803 CTL Unit Failure of FWD Drainmast
and/or
TSM 30-71-00-810-804 CTL Unit Failure of AFT Drainmast
(2) Do the subsequent steps to reactivate the related galley(s):
(5) Make sure that the lavatory washbasin is serviceable.
(6) Make sure that the work area is clean and clear of tools and other items.
(7) Close the lavatory door.
Subtask 30-71-00-440-050-B ** ON A/C NOT FOR ALL (1) Do the trouble-shooting of the waste-water drainmast heating-system:
TSM 30-71-00-810-801 FWD Drainmast-Heater Failure
and/or
TSM 30-71-00-810-802 AFT Drainmast-Heater Failure
and/or
TSM 30-71-00-810-803 CTL Unit Failure of FWD Drainmast
and/or
TSM 30-71-00-810-804 CTL Unit Failure of AFT Drainmast
(2) Do the subsequent steps to reactivate the related galley(s):
- Remove the placard.
- Open the shutoff valve of the related galley.
- Unlock and open the lavatory door.
- Remove the placard from the lavatory.
- Open the shutoff valve of the lavatory washbasin.
(5) Make sure that the lavatory washbasin is serviceable.
(6) Make sure that the work area is clean and clear of tools and other items.
(7) Close the lavatory door.
B. Reactivation
(1) Do the trouble-shooting of the waste-water drainmast heating-system:
TSM 30-71-00-810-801 FWD Drainmast-Heater Failure
and/or
TSM 30-71-00-810-809 MID Drainmast-Heater Failure
and/or
TSM 30-71-00-810-802 AFT Drainmast-Heater Failure
and/or
TSM 30-71-00-810-803 CTL Unit Failure of FWD Drainmast
and/or
TSM 30-71-00-810-810 CTL Unit Failure of MID Drainmast
and/or
TSM 30-71-00-810-804 CTL Unit Failure of AFT Drainmast
(2) Do the subsequent steps to reactivate the related galley(s):
(5) Make sure that the lavatory washbasin is serviceable.
(6) Make sure that the work area is clean and clear of tools and other items.
(7) Close the lavatory door.
5. Close-up(1) Do the trouble-shooting of the waste-water drainmast heating-system:
TSM 30-71-00-810-801 FWD Drainmast-Heater Failure
and/or
TSM 30-71-00-810-809 MID Drainmast-Heater Failure
and/or
TSM 30-71-00-810-802 AFT Drainmast-Heater Failure
and/or
TSM 30-71-00-810-803 CTL Unit Failure of FWD Drainmast
and/or
TSM 30-71-00-810-810 CTL Unit Failure of MID Drainmast
and/or
TSM 30-71-00-810-804 CTL Unit Failure of AFT Drainmast
(2) Do the subsequent steps to reactivate the related galley(s):
- Remove the placard.
- Open the shutoff valve of the related galley.
- Unlock and open the lavatory door.
- Remove the placard from the lavatory.
- Open the shutoff valve of the lavatory washbasin.
(5) Make sure that the lavatory washbasin is serviceable.
(6) Make sure that the work area is clean and clear of tools and other items.
(7) Close the lavatory door.
Subtask 30-71-00-862-058-A
Potable Water Lavatory Shutoff Valve