Remove Ram Air Turbine AGCM and Pump for for in Shop Functional Check

TASK 29-22-00-920-002-A
Remove Ram Air Turbine AGCM and Pump for for in Shop Functional Check

ZONE: 190
ZONE: 195
ZONE: 197
FIN: 2GE ** ON A/C NOT FOR ALL

1. Reason for the Job
Refer to the MPD TASK: 292000-06
REMOVE RAM AIR TURBINE AGCM AND PUMP FOR IN SHOP FUNCTIONAL CHECK.
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
190	BELLY FAIR, AIR CONDITIONING & HYD COMPT
195	HYDRAULIC COMPT AND FAIRINGS
197	REAR FAIRING

3. Job Set-up
Subtask 29-22-00-860-093-A ** ON A/C NOT FOR ALL

A. There is no special job set-up for this task.

4. Procedure
Subtask 29-22-00-020-052-A ** ON A/C NOT FOR ALL

A. Removal of the Components
(1) Remove the RAT ground check module (2027GE) (Ref. AMM D/O 29-22-52-00).
(2) Remove the RAT hydraulic pump (Ref. AMM D/O 29-22-51-00).

Subtask 29-22-00-720-055-A ** ON A/C NOT FOR ALL

B. Functional Check of the Ground-check Module (2027GE) and the Hydraulic Pump
(1) Send the RAT ground-check module (2027GE) and the hydraulic pump to the workshop.

Subtask 29-22-00-420-053-A ** ON A/C NOT FOR ALL

C. Installation of the Components
(1) Install the RAT ground check module (2027GE) (Ref. AMM D/O 29-22-52-40).
(2) Install the RAT hydraulic pump (Ref. AMM D/O 29-22-51-40).

[Rev.8 from Aug 2017] 2026.04.02 06:19:38 UTC