Removal of the Magnetic Level-Indicator Rod

TASK 28-43-23-000-001-A
Removal of the Magnetic Level-Indicator Rod

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

FIN: 92QM

1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY BARRIER(S)

B. Referenced Information

REFERENCE	DESIGNATION
TASK 28-00-00-910-001-A	Fuel Safety Procedures
Magnetic Level Indicator 92QM - Rod Detail

3. Job Set-up
Subtask 28-43-23-941-057-A

A. Safety Precautions

WARNING: OBEY THE FUEL SAFETY PROCEDURES.

(1) You must obey the fuel safety procedures when you do work on the fuel system (Ref. AMM TASK 28-00-00-910-001).
(2) Put the SAFETY BARRIER(S) in position.

4. Procedure
Subtask 28-43-23-020-054-A

A. Removal of the Magnetic Level-Indicator Rod 92QM
(1) Push the Magnetic Level Indicator (MLI) rod (5) in against the spring (2) and turn it through 90 deg. to release.
(2) Pull the MLI rod (5) out until the magnet (1) touches the seal (3). Continue to pull until the MLI rod (5) is out of the MLI lower housing (4).

[Rev.10 from 2021] 2026.04.02 06:18:14 UTC