Removal of the Fuel Quantity-Indicating Computer (FQIC) On Board Removable Memory
TASK 28-42-34-000-002-A
Removal of the Fuel Quantity-Indicating Computer (FQIC) On Board Removable Memory
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 28-42-34-861-051-A ** ON A/C NOT FOR ALL Subtask 28-42-34-865-053-A ** ON A/C NOT FOR ALL
Subtask 28-42-34-020-051-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:18:08 UTC
Removal of the Fuel Quantity-Indicating Computer (FQIC) On Board Removable Memory
FIN: 3QT ** ON A/C NOT FOR ALL
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 811 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
Subtask 28-42-34-861-051-A ** ON A/C NOT FOR ALL Subtask 28-42-34-865-053-A ** ON A/C NOT FOR ALL
B. Open, safety and tag this(these) circuit breaker(s):
Subtask 28-42-34-010-051-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | FUEL/FQI/CHAN/1 | 1QT | A13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | FUEL/FQI/CHANNEL/1 AND 2 | 8QT | L26 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | FUEL/FQI/CHAN/2 | 2QT | M27 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | FUEL/FQI/CHANNEL/1 AND 2 | 8QT | L25 |
C. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) in position at the access door 811.
(2) Open access door 811.
4. Procedure(1) Put the ACCESS PLATFORM 2M (6 FT) in position at the access door 811.
(2) Open access door 811.
Subtask 28-42-34-020-051-A ** ON A/C NOT FOR ALL
A. Removal of the FQIC (3QT)
Fuel Quantity Indicating Computer (FQIC) with On Board Removable Memory (OBRM) ** ON A/C NOT FOR ALL
(1) Loosen the knurled nuts (3).
(2) Remove the FQIC (4) from its rack.
(3) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
Subtask 28-42-34-020-052-A ** ON A/C NOT FOR ALL
Fuel Quantity Indicating Computer (FQIC) with On Board Removable Memory (OBRM) ** ON A/C NOT FOR ALL (2) Remove the FQIC (4) from its rack.
(3) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
B. Removal of the FQIC OBRM (3QT1)
(1) Loosen the screws (6) on the front of the FQIC (3QT).
(2) Remove the OBRM module (7).
(1) Loosen the screws (6) on the front of the FQIC (3QT).
(2) Remove the OBRM module (7).