DOC AIRBUS | AMM A320FInterrogation of the (SMITHS INDUSTRIES) FQIS Troubleshooting Data
TASK 28-42-00-740-007-A
Interrogation of the (SMITHS INDUSTRIES) FQIS Troubleshooting Data
This Task shows you how to access the FQIS TROUBLE SHOOTING data pages on the MCDU. The trouble shooting data is available for the FQIC, FLSCU's and cadensicon when one of those LRUs is given as a fault message. Cross-reference tables are supplied to let you read the related failure type.
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 28-42-00-860-061-A ** ON A/C NOT FOR ALL
Subtask 28-42-00-740-087-A ** ON A/C NOT FOR ALL
Subtask 28-42-00-860-062-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:18:05 UTC
Interrogation of the (SMITHS INDUSTRIES) FQIS Troubleshooting Data
WARNING:
OBEY THE FUEL SAFETY PROCEDURES.
1. Reason for the JobThis Task shows you how to access the FQIS TROUBLE SHOOTING data pages on the MCDU. The trouble shooting data is available for the FQIC, FLSCU's and cadensicon when one of those LRUs is given as a fault message. Cross-reference tables are supplied to let you read the related failure type.
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 31-32-00-860-001-A | Procedure to Get Access to the SYSTEM REPORT/TEST Menu Page |
| TASK 31-60-00-860-001-A | EIS Start Procedure |
| TASK 31-60-00-860-002-A | EIS Stop Procedure |
| TASK 34-10-00-860-002-A | ADIRS Start Procedure |
| TASK 34-10-00-860-005-A | ADIRS Stop Procedure |
Access to the T/S Data From the LAST LEG REPORT (SI)Subtask 28-42-00-860-061-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001).
(2) Do the ADIRS start procedure (Ref. AMM TASK 34-10-00-860-002).
(3) Get access to the SYSTEM REPORT/TEST Menu Page (Ref. AMM TASK 31-32-00-860-001).
Subtask 28-42-00-865-055-A ** ON A/C NOT FOR ALL (1) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001).
(2) Do the ADIRS start procedure (Ref. AMM TASK 34-10-00-860-002).
(3) Get access to the SYSTEM REPORT/TEST Menu Page (Ref. AMM TASK 31-32-00-860-001).
B. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | FUEL/FQI/CHAN/1 | 1QT | A13 |
| 121VU | FUEL/FQI/CHANNEL/1 AND 2 | 8QT | L26 |
| 121VU | FUEL/FQI/CHAN/2 | 2QT | M27 |
Subtask 28-42-00-740-087-A ** ON A/C NOT FOR ALL
A. CFDS FUEL - SYSTEM REPORT/TEST to TROUBLE SHOOTING data access routing
(1) Read the table that follows to find what LRU fault message is given on what FUEL menu page.
(2) Do the work step shown in the table that follows to get access to the required trouble shooting data from the applicable menu page.
Subtask 28-42-00-740-079-A ** ON A/C NOT FOR ALL (1) Read the table that follows to find what LRU fault message is given on what FUEL menu page.
| LRU | LAST LEG REPORT | PREVIOUS LEG REPORT | CLASS 3 FAULTS | FQIS STATUS | FLSS STATUS |
|---|---|---|---|---|---|
| FQIC | YES | YES | NO | YES | NO |
| FLSCU | YES | YES | NO | NO | YES |
| CADENSICON | NO | NO | YES | YES | NO |
| REQUIRED FUEL MENU START | DO PARA |
|---|---|
| LAST LEG REPORT | 4.B. |
| PREVIOUS LEGS REPORT | 4.C. |
| CLASS 3 FAULTS | 4.D. |
| FQIS STATUS | 4.E. |
| FLSS STATUS | 4.F. |
NOTE: The FUEL XXXXXX TROUBLE SHOOTING page is as follows:
| -------------------------- |
| !CH1 FUEL ! |
| !XXXXXX TROUBLE SHOOTING ! |
| 1L ! FEB29 2000 XY-ABCD ! 1R |
| ! ABCDEFGHJKLMNPQR ! |
| 2L !1 0000000000000000 ! 2R |
| !2 0100000000000000 ! |
| 3L !3 0000000000000000 ! 3R |
| !4 0000000000000000 ! |
| 4L !5 0000000000000000 ! 4R |
| !6 0000000000000000 ! |
| 5L ! ! 5R |
| ! ! |
| 6L ! <RETURN PRINT>! 6R |
| -------------------------- |
| Where XXXXXX = |
| FQIC - when the FQIC TROUBLE SHOOTING data is shown. |
| CADENS - when the cadensicon TROUBLE SHOOTING data is shown. |
| FLSCU - when the FLSCU TROUBLE SHOOTING data is shown. |
| and |
| a 1 = the failure type of the reported fault message. |
| a 0 = a serviceable item or unused grid reference. |
B. Interrogation of the FUEL FLSCU/FQIC TROUBLE SHOOTING data from the LAST LEG REPORT
(1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure
Subtask 28-42-00-740-080-A ** ON A/C NOT FOR ALL (1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure
| ACTION | RESULT |
|---|---|
| 1.Push the MCDU line key adjacent to the FUEL indication. |
|
| 2.Push the line key adjacent to the LAST LEG REPORT. |
|
| 3.When the LAST LEG REPORT shows NO FAULTS: | |
| A.Push the RETURN key two times to exit the FUEL system menus. |
|
| B.Do the Close-up, or if applicable, access other FUEL menus. | |
| 4.When the LAST LEG REPORT shows an applicable failed LRU message: | |
| A.Push the line key to the right of its ATA number. |
|
| B.Find the location (GRID REF) of the 1(s) shown in the TROUBLE SHOOTING data. | |
| C.Make a record of the GRID REF of the 1(s), or use the MCDU print function to get a print-out of the TROUBLE SHOOTING data. | |
| D.Go to the applicable step that follows, and read the failure type for the given GRID REF: | |
| |
| |
| E.When applicable, do the Close-up. | |
C. Interrogation of the FUEL FLSCU/FQIC TROUBLE SHOOTING data from the PREVIOUS LEGS REPORT
(1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
Subtask 28-42-00-740-083-A ** ON A/C NOT FOR ALL (1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
| ACTION | RESULT |
|---|---|
| 1.Push the MCDU line key adjacent to the FUEL indication. |
|
| 2.Push the line key adjacent to the PREVIOUS LEGS REPORT. |
|
| 3.When the PREVIOUS LEGS REPORT shows NO FAULTS: | |
| A.Push the RETURN key two times to exit the FUEL system menus. |
|
| B.Do the Close-up, or if applicable, access other FUEL menus. | |
| 4.When the PREVIOUS LEGS REPORT shows an applicable failed LRU message: | |
| A.Push the line key to the right of its ATA number. |
|
| B.Find the location (GRID REF) of the 1(s) shown in the TROUBLE SHOOTING data. | |
| C.Make a record of the GRID REF of the 1(s), or use the MCDU print function to get a print-out of the TROUBLE SHOOTING data. | |
| D.Go to the applicable step that follows, and read the failure type for the given GRID REF: | |
| |
| |
| E.When applicable, do the Close-up. | |
D. Interrogation of the FUEL CADENS (cadensicon) TROUBLE SHOOTING data from the CLASS 3 FAULTS page
(1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
Subtask 28-42-00-740-081-A ** ON A/C NOT FOR ALL (1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
| ACTION | RESULT |
|---|---|
| 1.Push the MCDU line key adjacent to the FUEL indication. |
|
| 2.Push the line key adjacent to the CLASS 3 FAULTS. |
|
| 3.When the CLASS 3 FAULTS page shows NO FAULTS: | |
| A.Push the RETURN key two times to exit the FUEL system menus. |
|
| B.Do the Close-up, or if applicable, access other FUEL menus. | |
| 4.When the CLASS 3 FAULTS page shows a CADENSICON (19QT1/19QT2/20QT) fault message: | |
| A.Push the line key to the right of its ATA number. |
|
| B.Find the location (GRID REF) of the 1(s) shown in the TROUBLE SHOOTING data. | |
| C.Make a record of the GRID REF of the 1(s), or use the MCDU print function to get a print-out of the TROUBLE SHOOTING data. | |
| D.Go to Para 4.G. and read the failure type for the given GRID REF. | |
| E.When applicable, do the Close-up. | |
E. Interrogation of the FUEL CADENS/FQIC TROUBLE SHOOTING data from the FQIS STATUS page
(1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
Subtask 28-42-00-740-082-A ** ON A/C NOT FOR ALL (1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
| ACTION | RESULT |
|---|---|
| 1.Push the MCDU line key adjacent to the FUEL indication. |
|
| 2.Push the MCDU NEXT PAGE key. |
|
| 3.Push the line key adjacent to the FQIS STATUS. |
|
| 4.When the FQIS STATUS page shows NO FAULTS: | |
| A.Push the RETURN key two times to exit the FUEL system menus. |
|
| B.Do the Close-up, or if applicable, access other FUEL menus. | |
| 5.When the FQIS STATUS page shows an applicable failed LRU message: | |
| A.Push the line key to the right of its ATA number. |
|
| B.Find the location (GRID REF) of the 1(s) shown in the TROUBLE SHOOTING data. | |
| C.Make a record of the GRID REF of the 1(s), or use the MCDU print function to get a print-out of the TROUBLE SHOOTING data. | |
| D.Go to the applicable step that follows, and read the failure type for the given GRID REF: | |
| |
| |
| E.When applicable, do the Close-up. | |
F. Interrogation of the FUEL FLSCU TROUBLE SHOOTING data from the FLSS STATUS page
(1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
Subtask 28-42-00-740-084-A ** ON A/C NOT FOR ALL (1) When the SYSTEM REPORT/TEST menu page comes into view, do this procedure:
| ACTION | RESULT |
|---|---|
| 1.Push the MCDU line key adjacent to the FUEL indication. |
|
| 2.Push the MCDU NEXT PAGE key. |
|
| 3.Push the line key adjacent to the FLSS STATUS. |
|
| 4.When the FLSS STATUS page shows NO FAULTS: | |
| A.Push the RETURN key two times to exit the FUEL system menus. |
|
| B.Do the Close-up, or if applicable, access other FUEL menus. | |
| 5.When the FLSS STATUS page shows an FLSCU 1 or 2 fault message: | |
| A.Push the line key to the right of its ATA number. |
|
| B.Find the location (GRID REF) of the 1(s) shown in the TROUBLE SHOOTING data. | |
| C.Make a record of the GRID REF of the 1(s), or use the MCDU print function to get a print-out of the TROUBLE SHOOTING data. | |
| D.Go to Para 4.H. and read the failure type for the given GRID REF. | |
| E.When applicable, do the Close-up. | |
G. The CADENSICON TROUBLE SHOOTING Data List
Subtask 28-42-00-740-085-A ** ON A/C NOT FOR ALL | GRID REF | FAILURE TYPE |
|---|---|
| 1A | Left Cadensicon Kd |
| 1B | Left Cadensicon D |
| 1C | Left Cadensicon A |
| 1C | Left Cadensicon Diode |
| 2A | Center Cadensicon Kd |
| 2B | Center Cadensicon D |
| 2C | Center Cadensicon A |
| 2D | Center Cadensicon Diode |
| 3A | Right Cadensicon Kd |
| 3B | Right Cadensicon D |
| 3C | Right Cadensicon A |
| 3D | Right Cadensicon Diode |
NOTE: All the other locations/positions are not used and always read 0.
H. The FLSCU TROUBLE SHOOTING Data List
Subtask 28-42-00-740-086-A ** ON A/C NOT FOR ALL | GRID REF | FAILURE TYPE |
|---|---|
| 1A | FLSCU 1 Logic 1 |
| 1B | FLSCU 1 Logic 2 |
| 1C | FLSCU 1 Sensor monitor only |
| 1D | FLSCU 1 Multiple Sensor Failures |
| 1E | FLSCU 1 Sensor Failure with no monitor |
| 2A | FLSCU 2 Logic 1 |
| 2B | FLSCU 2 Logic 2 |
| 2C | FLSCU 2 Sensor monitor only |
| 2D | FLSCU 2 Multiple Sensor Failures |
| 2E | FLSCU 2 Sensor Failure with no monitor |
NOTE: All the other locations/positions are not used and always read 0.
I. The FQIC TROUBLE SHOOTING Data Lists
Subtask 28-42-00-740-086-C ** ON A/C NOT FOR ALL | GRID REF | FAILURE TYPE |
|---|---|
| 1A | Left Probe 1 Internal BITE |
| 1B | Left Probe 2 Internal BITE |
| 1C | Left Probe 3 Internal BITE |
| 1D | Left Probe 4 Internal BITE |
| 1E | Left Probe 5 Internal BITE |
| 1F | Left Probe 6 Internal BITE |
| 1G | Left Probe 7 Internal BITE |
| 1H | Left Probe 8 Internal BITE |
| 1J | Left Probe 9 Internal BITE |
| 1K | Left Probe 10 Internal BITE |
| 1L | Left Probe 11 Internal BITE |
| 1M | Left Probe 12 Internal BITE |
| 1N | Left Probe 13 Internal BITE |
| 1P | Left Probe 14 Internal BITE |
| 1Q | Left Cadensicon Kd Internal BITE |
| 1R | Left Probe 4x (CIC) Internal BITE |
| Table 1 - First Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 2A | Center Probe 1 Internal BITE |
| 2B | Center Probe 2 Internal BITE |
| 2C | Center Probe 3 Internal BITE |
| 2D | Center Probe 4 Internal BITE |
| 2E | Center Probe 5 Internal BITE |
| 2F | Left Density Drive Amplitude |
| 2G | Left Density Drive Frequency |
| 2H | Center Density Drive Amplitude |
| 2J | Center Density Drive Frequency |
| 2K | Right Density Drive Amplitude |
| 2L | Right Density Drive Frequency |
| 2M | Dual Temperature Failure Channel 1 |
| 2N | Dual Temperature Failure Channel 2 |
| 2P | Not Used |
| 2Q | Center Cadensicon Kd Internal BITE |
| 2R | Center Probe 5x (CIC) Internal BITE |
| Table 2 - Second Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 3A | Right Probe 1 Internal BITE |
| 3B | Right Probe 2 Internal BITE |
| 3C | Right Probe 3 Internal BITE |
| 3D | Right Probe 4 Internal BITE |
| 3E | Right Probe 5 Internal BITE |
| 3F | Right Probe 6 Internal BITE |
| 3G | Right Probe 7 Internal BITE |
| 3H | Right Probe 8 Internal BITE |
| 3J | Right Probe 9 Internal BITE |
| 3K | Right Probe 10 Internal BITE |
| 3L | Right Probe 11 Internal BITE |
| 3M | Right Probe 12 Internal BITE |
| 3N | Right Probe 13 Internal BITE |
| 3P | Right Probe 14 Internal BITE |
| 3Q | Right Cadensicon Kd Internal BITE |
| 3R | Right Probe 4x (CIC) Internal BITE |
| Table 3 - Third Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 4A | Power Supply A (Channel 1) |
| 4B | Osc. Voltage Left A - Odd Probes & Cadensicon |
| 4C | Osc. Frequency Left A - Odd Probes & Cadensicon |
| 4D | Osc, Vf Product Left A - Odd Probes & Cadensicon |
| 4E | Osc. Voltage Center A - CT Probes 2, 3, 4 & Cadensicon |
| 4F | Osc. Frequency Center A - CT Probes 2, 3, 4 & Cadensicon |
| 4G | Osc. Vf Product Center A - CT Probes 2, 3, 4 & Cadensicon |
| 4H | Osc. Voltage Right A - Even Probes & CIC |
| 4J | Osc. Frequency Right A - Even Probes & CIC |
| 4K | Osc. Vf Product Right A - Even Probes & CIC |
| 4L | High Voltage Reference A |
| 4M | Low Voltage Reference A |
| 4N | ADC Offset A |
| 4P | ADC Gain A |
| 4Q | Multiple Fail on Left Osc. A - Odd Probes & Cad |
| 4R | Multiple Fail on Left Osc. B - Even Probes & CIC |
| Table 4 - Fourth Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 5A | Power Supply B (Channel 2) |
| 5B | Osc. Voltage Left B - Even Probes & CIC |
| 5C | Osc. Frequency Left B - Even Probes & CIC |
| 5D | Osc, Vf Product Left B - Even Probes & CIC |
| 5E | Osc. Voltage Center B - CT Probes 1, 5 & CIC |
| 5F | Osc. Frequency Center B - CT Probes 1, 5 & CIC |
| 5G | Osc. Vf Product Center B - CT Probes 1, 5 & CIC |
| 5H | Osc. Voltage Right B - Odd Probes & Cadensicon |
| 5J | Osc. Frequency Right B - Odd Probes & Cadensicon |
| 5K | Osc. Vf Product Right B - Odd Probes & Cadensicon |
| 5L | High Voltage Reference B |
| 5M | Low Voltage Reference B |
| 5N | ADC Offset B |
| 5P | ADC Gain B |
| 5Q | Multiple Fail on Center Osc. A - Probes 2, 3, 4 & Cadensicon |
| 5R | Multiple Fail on Center Osc. B - Probes 1, 5 & CIC |
| Table 5 - Fifth Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 6A | Lane Select Conflict |
| 6B | Pin Programming Error |
| 6C | Fuel Calculation |
| 6D | Current Channel FSIB Failure |
| 6E | Other Channel FSIB Failure |
| 6F | Card 5 |
| 6G | EEPROM |
| 6H | CPU Exception |
| 6J | Cross-coms |
| 6K | ARINC |
| 6L | Other CPU |
| 6M | Left Refuel Valve |
| 6N | Right Refuel Valve |
| 6P | Center Refuel Valve |
| 6Q | Multiple Fail on Right Osc. A - Even Probes & CIC |
| 6R | Multiple Fail on Right Osc. B - Odd Probes & Cadensicon |
| Table 6 - Sixth Row |
I. The FQIC TROUBLE SHOOTING Data Lists
5. Close-up| GRID REF | FAILURE TYPE |
|---|---|
| 1A | Left Probe 1 Internal BITE |
| 1B | Left Probe 2 Internal BITE |
| 1C | Left Probe 3 Internal BITE |
| 1D | Left Probe 4 Internal BITE |
| 1E | Left Probe 5 Internal BITE |
| 1F | Left Probe 6 Internal BITE |
| 1G | Left Probe 7 Internal BITE |
| 1H | Left Probe 8 Internal BITE |
| 1J | Left Probe 9 Internal BITE |
| 1K | Left Probe 10 Internal BITE |
| 1L | Left Probe 11 Internal BITE |
| 1M | Left Probe 12 Internal BITE |
| 1N | Left Probe 13 Internal BITE |
| 1P | Left Probe 14 Internal BITE |
| 1Q | Left Cadensicon Kd Internal BITE |
| 1R | Left Probe 4x (CIC) Internal BITE |
| Table 1 - First Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 2A | Center Probe 1 Internal BITE |
| 2B | Center Probe 2 Internal BITE |
| 2C | Center Probe 3 Internal BITE |
| 2D | Center Probe 4 Internal BITE |
| 2E | Center Probe 5 Internal BITE |
| 2F | Left Density Drive Amplitude |
| 2G | Left Density Drive Frequency |
| 2H | Center Density Drive Amplitude |
| 2J | Center Density Drive Frequency |
| 2K | Right Density Drive Amplitude |
| 2L | Right Density Drive Frequency |
| 2M | Dual Temperature Failure Channel 1 |
| 2N | Dual Temperature Failure Channel 2 |
| 2P | Not Used |
| 2Q | Center Cadensicon Kd Internal BITE |
| 2R | Center Probe 5x (CIC) Internal BITE |
| Table 2 - Second Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 3A | Right Probe 1 Internal BITE |
| 3B | Right Probe 2 Internal BITE |
| 3C | Right Probe 3 Internal BITE |
| 3D | Right Probe 4 Internal BITE |
| 3E | Right Probe 5 Internal BITE |
| 3F | Right Probe 6 Internal BITE |
| 3G | Right Probe 7 Internal BITE |
| 3H | Right Probe 8 Internal BITE |
| 3J | Right Probe 9 Internal BITE |
| 3K | Right Probe 10 Internal BITE |
| 3L | Right Probe 11 Internal BITE |
| 3M | Right Probe 12 Internal BITE |
| 3N | Right Probe 13 Internal BITE |
| 3P | Right Probe 14 Internal BITE |
| 3Q | Right Cadensicon Kd Internal BITE |
| 3R | Right Probe 4x (CIC) Internal BITE |
| Table 3 - Third Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 4A | Power Supply A (Channel 1) |
| 4B | Osc. Voltage Left A - Odd Probes & Cadensicon |
| 4C | Osc. Frequency Left A - Odd Probes & Cadensicon |
| 4D | Osc, Vf Product Left A - Odd Probes & Cadensicon |
| 4E | Osc. Voltage Center A - CT Probes 2, 3, 4 & Cadensicon |
| 4F | Osc. Frequency Center A - CT Probes 2, 3, 4 & Cadensicon |
| 4G | Osc. Vf Product Center A - CT Probes 2, 3, 4 & Cadensicon |
| 4H | Osc. Voltage Right A - Even Probes & CIC |
| 4J | Osc. Frequency Right A - Even Probes & CIC |
| 4K | Osc. Vf Product Right A - Even Probes & CIC |
| 4L | High Voltage Reference A |
| 4M | Low Voltage Reference A |
| 4N | ADC Offset A |
| 4P | ADC Gain A |
| 4Q | Multiple Fail on Left Osc. A - Odd Probes & Cad |
| 4R | Multiple Fail on Left Osc. B - Even Probes & CIC |
| Table 4 - Fourth Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 5A | Power Supply B (Channel 2) |
| 5B | Osc. Voltage Left B - Even Probes & CIC |
| 5C | Osc. Frequency Left B - Even Probes & CIC |
| 5D | Osc, Vf Product Left B - Even Probes & CIC |
| 5E | Osc. Voltage Center B - CT Probes 1, 5 & CIC |
| 5F | Osc. Frequency Center B - CT Probes 1, 5 & CIC |
| 5G | Osc. Vf Product Center B - CT Probes 1, 5 & CIC |
| 5H | Osc. Voltage Right B - Odd Probes & Cadensicon |
| 5J | Osc. Frequency Right B - Odd Probes & Cadensicon |
| 5K | Osc. Vf Product Right B - Odd Probes & Cadensicon |
| 5L | High Voltage Reference B |
| 5M | Low Voltage Reference B |
| 5N | ADC Offset B |
| 5P | ADC Gain B |
| 5Q | Multiple Fail on Center Osc. A - Probes 2, 3, 4 & Cadensicon |
| 5R | Multiple Fail on Center Osc. B - Probes 1, 5 & CIC |
| Table 5 - Fifth Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 6A | Lane Select Conflict |
| 6B | Pin Programming Error |
| 6C | Fuel Calculation |
| 6D | Current Channel FSIB Failure |
| 6E | Other Channel FSIB Failure |
| 6F | Card 5 |
| 6G | EEPROM |
| 6H | CPU Exception |
| 6J | Cross-coms |
| 6K | ARINC |
| 6L | Other CPU |
| 6M | Left Refuel Valve |
| 6N | Right Refuel Valve |
| 6P | Center Refuel Valve |
| 6Q | Multiple Fail on Right Osc. A - Even Probes & CIC |
| 6R | Multiple Fail on Right Osc. B - Odd Probes & Cadensicon |
| Table 6 - Sixth Row |
| GRID REF | FAILURE TYPE |
|---|---|
| 7A | ACT 1 Refuel/Inlet Valve |
| 7B | ACT 2 Refuel/Inlet Valve |
| 7C | ACT 1 Probe 1 Internal BITE |
| 7D | ACT 1 Probe 2 Internal BITE |
| 7E | ACT 2 Probe 1 Internal BITE |
| 7F | ACT 2 Probe 2 Internal BITE |
| 7G | FSIB A Mode timeout Failure |
| 7H | FSIB B Mode timeout Failure |
| 7J | ALU Failure |
| 7K | RAM Failure |
| 7L | LH Density Oscillator Failure |
| 7M | RH Density Oscillator Failure |
| 7N | CT Density Oscillator Failure |
| 7P | LH Density BITE Mode Failure |
| 7Q | RH Density BITE Mode Failure |
| 7R | CT Density BITE Mode Failure |
| Table 7 - Seventh Row |
Subtask 28-42-00-860-062-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Put the aircraft back to its initial configuration.
(a) On the MCDU, push the line key adjacent to the RETURN indication until the MCDU Menu page comes into view.
(b) On the MCDU, set the BRT knob to OFF.
(c) If applicable, do the ADIRS stop procedure (Ref. AMM TASK 34-10-00-860-005).
(d) Do the EIS stop procedure (Ref. AMM TASK 31-60-00-860-002).
(e) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).
(1) Put the aircraft back to its initial configuration.
(a) On the MCDU, push the line key adjacent to the RETURN indication until the MCDU Menu page comes into view.
(b) On the MCDU, set the BRT knob to OFF.
(c) If applicable, do the ADIRS stop procedure (Ref. AMM TASK 34-10-00-860-005).
(d) Do the EIS stop procedure (Ref. AMM TASK 31-60-00-860-002).
(e) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).