Replace ACT Air Inlet Filter
TASK 28-28-39-920-001-A
Replace ACT Air Inlet Filter
Refer to the MPD TASK: 282800-06
REPLACE ACT AIR INLET FILTER
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Expendable Parts
D. Referenced Information
3. Job Set-up
Subtask 28-28-39-860-052-A ** ON A/C NOT FOR ALL
Subtask 28-28-39-960-051-A ** ON A/C NOT FOR ALL
Subtask 28-28-39-410-052-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:17:57 UTC
Replace ACT Air Inlet Filter
WARNING:
OBEY THE FUEL SAFETY PROCEDURES.
1. Reason for the JobRefer to the MPD TASK: 282800-06
REPLACE ACT AIR INLET FILTER
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | 1 | WARNING NOTICE(S) |
| No specific | Torque wrench: range to between 0.2 and 0.19 m.daN (17.70 and 16.81 lbf.in ) ![]() |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 152DW, 152YW |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 1 | FILTER ELEMENT | AIPC 28-28-39-01-010 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 25-55-11-000-003-A | Removal of the Sidewall Panels in the Aft Cargo Compartment - FR47/FR59 |
| TASK 25-55-11-400-003-A | Installation of the Sidewall Panels in the Aft Cargo Compartment - FR47/FR59 |
| TASK 28-00-00-910-001-A | Fuel Safety Procedures |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-002-A | Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
Subtask 28-28-39-860-052-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Obey the fuel safety procedures (Ref. AMM TASK 28-00-00-910-001).
(2) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(3) Put a WARNING NOTICE(S) in position on:
Subtask 28-28-39-010-052-A ** ON A/C NOT FOR ALL (1) Obey the fuel safety procedures (Ref. AMM TASK 28-00-00-910-001).
(2) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(3) Put a WARNING NOTICE(S) in position on:
- Refuel/defuel control panel 800/801VU,
- Fuel control panel 40VU
to tell persons not to operate the refuel/defuel system.
B. Get Access
(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put an ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment.
(3) In the aft cargo-compartment, remove access panel 152YW from sidewall panel 152DW (Ref. AMM TASK 25-55-11-000-003).
4. Procedure(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put an ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment.
(3) In the aft cargo-compartment, remove access panel 152YW from sidewall panel 152DW (Ref. AMM TASK 25-55-11-000-003).
Subtask 28-28-39-960-051-A ** ON A/C NOT FOR ALL
A. Replace ACT Air Inlet Filter
(1) Remove the nut (2) from plate (3).
(2) Remove the plate (3) from the filter element (1).
(3) Remove the filter element (1) from the structure.
(4) Clean the component interfaces and the adjacent area.
(5) Do an inspection of the component interfaces and the adjacent area.
(6) Put the new AIPC 28-28-39-01-010 FILTER ELEMENT (1) in position.
(7) Put the end plate (3) on the filter element (1) and install the nut (2).
(8) TORQUE the nut (2) to between 0.2 and 0.19 m.daN (17.70 and 16.81 lbf.in )
.
5. Close-up(1) Remove the nut (2) from plate (3).
(2) Remove the plate (3) from the filter element (1).
(3) Remove the filter element (1) from the structure.
(4) Clean the component interfaces and the adjacent area.
(5) Do an inspection of the component interfaces and the adjacent area.
(6) Put the new AIPC 28-28-39-01-010 FILTER ELEMENT (1) in position.
(7) Put the end plate (3) on the filter element (1) and install the nut (2).
(8) TORQUE the nut (2) to between 0.2 and 0.19 m.daN (17.70 and 16.81 lbf.in )
. Subtask 28-28-39-410-052-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) In the aft cargo-compartment, install access panel 152YW on sidewall panel 152DW (Ref. AMM TASK 25-55-11-400-003).
(3) Close the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002).
Subtask 28-28-39-860-053-A ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) In the aft cargo-compartment, install access panel 152YW on sidewall panel 152DW (Ref. AMM TASK 25-55-11-400-003).
(3) Close the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-002).
B. Put the aircraft back to the serviceable condition.
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the WARNING NOTICE(S).
(3) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the WARNING NOTICE(S).
(3) De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).
ACT Air Inlet Filter