Removal of the Cabin Air Intake Filter-Assembly
TASK 28-28-39-000-001-A
Removal of the Cabin Air Intake Filter-Assembly
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 28-28-39-860-050-A ** ON A/C NOT FOR ALL
Subtask 28-28-39-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:17:57 UTC
Removal of the Cabin Air Intake Filter-Assembly
WARNING:
OBEY THE FUEL SAFETY PROCEDURES.
FIN: 183QM ** ON A/C NOT FOR ALL
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | AR | PLUG - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 152DW |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-55-11-000-003-A | Removal of the Sidewall Panels in the Aft Cargo Compartment - FR47/FR59 |
| TASK 28-00-00-910-001-A | Fuel Safety Procedures |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
Subtask 28-28-39-860-050-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Obey the fuel safety procedures (Ref. AMM TASK 28-00-00-910-001).
(2) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(3) Put a WARNING NOTICE(S) in position on:
Subtask 28-28-39-010-059-A ** ON A/C NOT FOR ALL (1) Obey the fuel safety procedures (Ref. AMM TASK 28-00-00-910-001).
(2) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(3) Put a WARNING NOTICE(S) in position on:
- the refuel/defuel control panel 800/801VU,
- the fuel control panel 40VU,
to tell persons not to operate the refuel/defuel system.
B. Get Access
(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put an ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment.
(3) In the aft cargo-compartment, remove the sidewall panel 152DW (Ref. AMM TASK 25-55-11-000-003).
Subtask 28-28-39-865-050-A ** ON A/C NOT FOR ALL (1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put an ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment.
(3) In the aft cargo-compartment, remove the sidewall panel 152DW (Ref. AMM TASK 25-55-11-000-003).
C. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | ACT1/REFUEL & SPLY | 33QU | L29 |
| 121VU | FUEL/HI/LVL/SPLY | 1QJ | L25 |
| 121VU | FUEL/RFL/DFL/SPLY | 2QU | L24 |
| 121VU | FUEL/RFL/DFL/XFR/DEFUEL/VALVE | 1QU | L23 |
| 121VU | ACT XFR VALVE MAN CTL | 30QH | N29 |
| 121VU | ACT1/CTL & SPLY | 9QH | P29 |
| 121VU | ACT PUMP SUPPLY | 25QH | Q29 |
Subtask 28-28-39-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Air Filter Assembly
(1) Loosen the coupling nut (2) and disconnect the pipe (3) from the air filter assembly (1).
(2) Put the PLUG-BLANKING in each disconnected line end.
(3) Remove the self-locking nuts (4) and the washers (5) from the air filter assembly (1).
(4) Remove the air filter assembly (1) from the structure.
(1) Loosen the coupling nut (2) and disconnect the pipe (3) from the air filter assembly (1).
(2) Put the PLUG-BLANKING in each disconnected line end.
(3) Remove the self-locking nuts (4) and the washers (5) from the air filter assembly (1).
(4) Remove the air filter assembly (1) from the structure.
Cabin Air Intake Filter-Assembly