Reactivation of Engine LP-Fuel-Valve Actuator-Motor
TASK 28-24-00-440-002-A
Reactivation of Engine LP-Fuel-Valve Actuator-Motor
1. Reason for the Job
MMEL 28-24-01A
ENGINE LP FUEL VALVE ELECTRICAL MOTOR
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 28-24-00-941-062-A
Subtask 28-24-00-440-050-A
[Rev.10 from 2021]
2026.04.02 06:17:33 UTC
Reactivation of Engine LP-Fuel-Valve Actuator-Motor
1. Reason for the Job
MMEL 28-24-01A
ENGINE LP FUEL VALVE ELECTRICAL MOTOR
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 28-24-51-000-001-A | Removal of the LP Fuel Valve Actuator |
| TASK 28-24-51-400-001-A | Installation of the LP Fuel Valve Actuator |
Subtask 28-24-00-941-062-A
A. Not Applicable
4. ProcedureSubtask 28-24-00-440-050-A
A. Reactivation of Engine LP-Fuel-Valve Actuator-Motor
(1) Replace the applicable engine LP-fuel-valve actuator (Ref. AMM TASK 28-24-51-000-001) and (Ref. AMM TASK 28-24-51-400-001).
(2) Reactivate the serviceable motor on the engine LP-fuel-valve actuator as follows:
(a) If the LH actuator 9QG motor 1 was deactivated:
(1) Replace the applicable engine LP-fuel-valve actuator (Ref. AMM TASK 28-24-51-000-001) and (Ref. AMM TASK 28-24-51-400-001).
(2) Reactivate the serviceable motor on the engine LP-fuel-valve actuator as follows:
(a) If the LH actuator 9QG motor 1 was deactivated:
- make sure that the circuit breaker 1QG is closed.
- make sure that the circuit breaker 3QG is closed.
- make sure that the circuit breaker 2QG is closed.
- make sure that the circuit breaker 4QG is closed.