Remove CSU for Workshop Check of Friction Brake

TASK 27-51-17-280-001-A
Remove CSU for Workshop Check of Friction Brake

ZONE: 210
FIN: 51CV

1. Reason for the Job
Refer to the MPD TASK: 275117-01
REMOVE CSU FOR WORKSHOP CHECK OF FRICTION BRAKE
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 27-51-17-000-001-A	Removal of the Command Sensor Unit (CSU)
TASK 27-51-17-400-001-A	Installation of the Command Sensor Unit (CSU)

3. Job Set-up
Subtask 27-51-17-020-051-A

A. Removal of the Command Sensor Unit (CSU)
(1) Remove the CSU (Ref. AMM TASK 27-51-17-000-001).

4. Procedure
Subtask 27-51-17-280-050-A

A. Check of the CSU
(1) Do the test of the friction brake in the workshop.

5. Close-up
Subtask 27-51-17-420-051-A

A. Installation of the CSU
(1) Install the CSU (Ref. AMM TASK 27-51-17-400-001).

[Rev.10 from 2021] 2026.03.31 23:52:33 UTC