Removal of the Cable Tension Regulator

TASK 27-21-45-000-003-A
Removal of the Cable Tension Regulator

ZONE: 125
FIN: 103CM

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
125	LATERAL AVIONIC COMPARTMENT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 27-21-45-000-001-A	Removal of the Cable Tension Regulator Assy
Cable Tension Regulator (103CM)

3. Job Set-up
Subtask 27-21-45-020-053-A

A. Remove the cable tension regulator assy (Ref. AMM TASK 27-21-45-000-001).

4. Procedure
Subtask 27-21-45-020-054-A

A. Removal of the Cable Tension Regulator
(1) Remove the six screws (21).
(2) Remove the plate (22).
(3) Cut and discard the cotter pin (17) from the nut (18).
(4) Remove the nut (18) and the washer (16).
(5) Cut and discard the cotter pin (15) and unlock the nut (14).
(6) Remove the pin (8), the bellcrank assy (19) and the sleeve (13).
(7) Remove the six nuts (10) and the six bolts (12).
(8) Cut and discard the cotter pin (2) from the nut (1).
(9) Remove the nut (1) and the washer (3).
(10) Remove the bolt (7) with the washer (6).
(11) Remove the side fittings (9) and (23) from the cable tension regulator (11).
(12) Remove the cable tension regulator (11).

NOTE: Do not remove the spacer (20), the link (4) and the spacer (5) from the side fitting (9).

[Rev.10 from 2021] 2026.03.31 23:48:29 UTC