Bottle Weight Check

TASK 26-22-00-040-004-A-01
Bottle Weight Check

FIN: 11WF
Task Summary

Access	Test	Specific Tools	Mhr	E/T	Nb Men
NO	YES	NO	0.3	0.3	1

1. Reason for the Job
MMEL 26-01-01-05A
APU AGENT PB DISCH LIGHT
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 26-22-41-000-001-A	Removal of the Fire Extinguisher Bottle
TASK 26-22-41-400-001-A	Installation of the Fire Extinguisher Bottle

3. Job Set-up
Subtask 26-22-00-010-061-A

A. Remove the APU fire extinguisher bottle (11WF) (Ref. AMM TASK 26-22-41-000-001).

4. Procedure
Subtask 26-22-00-280-053-A

A. Weigh the APU fire extinguisher bottle
(1) Make sure that the gross weight of the fire-extinguisher bottle is the same as the last weight shown on the identification plate, plus or minus 50 g (1.76 oz).

NOTE: You must weigh the fire-extinguisher bottle without the discharge head and the cartridge. Compare the weight shown on the fire-extinguisher bottle with the weight shown on the identification plate. You must reject the fire-extinguisher bottle if the gross weight is not in the limits.

5. Close-up
Subtask 26-22-00-410-062-A

A. Put the System back to its Operational Configuration
(1) Install the APU fire extinguisher bottle (11WF) (Ref. AMM TASK 26-22-41-400-001).
(2) Make an entry in the aircraft technical logbook.

[Rev.10 from 2021] 2026.03.31 23:45:23 UTC