Energize the Smoke Detection System (SDS)
TASK 26-10-00-861-801-A
Energize the Smoke Detection System (SDS)
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 26-10-00-861-052-A ** ON A/C NOT FOR ALL
Subtask 26-10-00-860-055-A ** ON A/C NOT FOR ALL
Subtask 26-10-00-861-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:42:08 UTC
Energize the Smoke Detection System (SDS)
ZONE: 210
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
Subtask 26-10-00-861-052-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
4. Procedure(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 26-10-00-860-055-A ** ON A/C NOT FOR ALL
A. Energize the Smoke Detection System (SDS)
(1) Close the circuit breakers in the correct sequence.
Subtask 26-10-00-865-055-A ** ON A/C NOT FOR ALL (1) Close the circuit breakers in the correct sequence.
B. Remove the safety clips and tags and close these circuit breakers in this sequence:
5. Close-up| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 122VU | AIR COND/CIDS/SDF/DIR NORM/1 | 17WH | T17 |
| 122VU | AIR COND/CIDS/SDF/DIR NORM/2 | 14WH | T18 |
| 49VU | AIR COND/CIDS/SDF/DIR2 ESS | 18WH | C06 |
| 49VU | AIR COND/CIDS/SDF/DIR1 ESS | 15WH | C05 |
Subtask 26-10-00-861-053-A ** ON A/C NOT FOR ALL
A. Not Applicable